User`s guide

XVII. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire For Linux Page 284
Virtual Network Settings (Windows)
To attach a virtual network to a virtual machine, select the virtual network from the Virtual
Network list and the virtual machine from the VM list. Finally click Attach.
Figure 7.6.3.1 (l) – Attaching virtual network to VM (Windows)
7.6.4. iWARP
iWARP Settings
On Linux Agents, iWARP parameter settings for Chelsio's RDMA capable NICs can be set using
this module. These settings can be set only when iWARP driver (iw_cxgb4 for T4 and T5;
iw_cxgb3 for T3) is loaded. If you set any parameter for a T5 adapter, it applies for all the T5
adapters present. Same applies for T4 and T3 adapters.
On Windows Agents, only T3 HBAs are supported currently. Parameters can be set per port.
On FreeBSD Agents, only T4 CNAs are supported. iWARP parameter settings can be set only
when iw_cxgbe driver is loaded.