User`s guide

Chapter I. Chelsio Unified Wire
Chelsio T5/T4 Unified Wire For Linux Page 31
 To build and install NIC driver with offload support and Offload drivers:
[root@host]# make toe
[root@host]# make toe_install
 To build and install Offload drivers without IPv6 support:
[root@host]# make toe_ipv4
[root@host]# make toe_ipv4_install
 To build and install iWARP driver against outbox OFED:
[root@host]# make iwarp
[root@host]# make iwarp_install
 To build and install all drivers without IPv6 support:
[root@host]# make ipv6_disable=1
[root@host]# make ipv6_disable=1 install
The above step will not install Bypass and WD-TOE drivers.
 To build and install Bypass driver:
[root@host]# make bypass
[root@host]# make bypass_install
 To build and install WD-TOE driver:
[root@host]# make wdtoe
[root@host]# make wdtoe_install