User`s guide

Chapter XVIII. Unified Boot
Chelsio T5/T4 Unified Wire For Linux Page 347
3. Configuring PXE Server
The following components are required to configure a server as PXE Server:
 DHCP Server
 TFTP Server
PXE server configuration steps for Linux can be found on following links:
 http://linux-sxs.org/internet_serving/pxeboot.html
 http://www.howtoforge.com/ubuntu_pxe_install_server
PXE server configuration steps for Windows can be found on following links:
 http://technet.microsoft.com/en-us/library/cc771670%28WS.10%29.aspx
 http://tftpd32.jounin.net/ (Use port # 67, set PXE option and provide bootable file name in
settings)
 http://unattended.sourceforge.net/pxe-win2k.html
Chelsio Communications does not take any responsibility about contents given
in above mentioned links. Those are given for example purposes only.
Note