User`s guide

Chapter XVIII. Unified Boot
Chelsio T5/T4 Unified Wire For Linux Page 353
4.2. For uEFI PXE Boot
This section describes the method to configure and use Chelsio uEFI PXE interfaces.
i. After configuring the PXE server, make sure the PXE server works. Then reboot the client
machine.
ii. Configure the system having CNA to boot in UEFI mode.
 Only uEFI 2.1 supported.
 Any other uEFI version is NOT SUPPORTED and may render your
system unusable.
 Both Legacy and uEFI environments are supported on T4 adapters.
Whereas, only Legacy environment is currently supported on T5
adapters.
Important