User`s guide

Chapter XVIII. Unified Boot
Chelsio T5/T4 Unified Wire For Linux Page 424
iii. Driver disk source prompt:
You will be asked to select the Driver Update Disk device from a list. USB drives usually show
up as SCSI disks in Linux. So if there are no other SCSI disks connected to the system, the
USB drive would assume the first drive letter “a”. Hence the drive name would be “sda”.
You can view the messages from the Linux kernel and drivers to determine the name of the
USB drive, by pressing [Alt] + [F3/F4] and [Alt] + [F1] to get back to the list.
iv. Select the Driver Update File:
Select the Appropriate image file and Choose “OK”. Now the installer will search for the
appropriate drivers from the driver disk and load them. This step may take some time. Check on
the [Alt] + [F3] or [Alt] + [F4] screens for log messages.