User`s guide

Chelsio T5/T4 Unified Wire For Linux vi
1.2. Hardware Requirements 100
1.3. Software Requirements 102
2. Software/Driver Loading 104
2.1. Latest iSCSI Software Stack Driver Software 104
2.2. Obtaining the iSCSI Software License 106
3. Software/Driver Unloading 108
4. Software/Driver Configuration and Fine-tuning 109
4.1. Command Line Tools 109
4.2. iSCSI Configuration File 109
4.3. A Quick Start Guide for Target 110
4.4. The iSCSI Configuration File 113
4.5. Challenge-Handshake Authenticate Protocol (CHAP) 122
4.6. Target Access Control List (ACL) Configuration 124
4.7. Target Storage Device Configuration 125
4.8. Target Redirection Support 128
4.9. The command line interface tools “iscsictl” & “chisns” 129
4.10. Rules of Target Reload (i.e. “on the fly” changes) 134
4.11. System Wide Parameters 135
VIII. ISCSI PDU OFFLOAD INITIATOR 137
1. Introduction 138
1.1. Hardware Requirements 138
1.2. Software Requirements 139
2. Software/Driver Loading 140
3. Software/Driver Unloading 142
4. Software/Driver Configuration and Fine-tuning 143
4.1. Accelerating open-iSCSI Initiator 143
4.2. Auto login from cxgb4i initiator at OS bootup 146
IX. FCOE FULL OFFLOAD INITIATOR 147
1. Introduction 148
1.1. Hardware Requirements 148
1.2. Software Requirements 148
2. Software/Driver Loading 149
3. Software/Driver Unloading 150
4. Software/Driver Configuration and Fine-tuning 151
4.1. Configuring Cisco Nexus 5010 switch 151
4.2. FCoE fabric discovery verification 156
4.3. Formatting the LUNs and Mounting the Filesystem 162
4.4. Creating Filesystem 164
4.5. Mounting the formatted LUN 164