User`s guide

Chapter II. NDIS Function
Chelsio T5/T4 Unified Wire for Windows 25
Large Send Offload V2 (IPv4):
 Description: Allows for configuring Large Send Offload (LSO) using version 2 for the
IPv4 traffic.
 Value: Enabled | Disabled
 Default: Enabled
Large Send Offload V2 (IPv6):
 Description: Allows for configuring Large Send Offload (LSO) using version 2 for the
IPv6 traffic.
 Value: Enabled | Disabled
 Default: Enabled
Locally Administered Address:
 Description: Specifies a new MAC address for the port. If Not Present, the default MAC
from EEPROM is used. If specified, the new MAC overwrites the default MAC. This
specified MAC is persistent across machine reboot.
 Value: Not Present | Any legal 6-byte MAC address
 Default: Not Present
Maximum Number of RSS Queues:
 Description: For changing the number of RSS Queues.
 Value: 1-8
 Default: 4
NetworkDirect Functionality:
 Description: For enabling or disabling Network Direct Functionality.
 Value: Enabled | Disabled
 Default: Enabled
NetworkDirect Interrupt Moderation:
 Description: This parameter controls the interrupts generated during NDK traffic.
 Value: Enabled | Disabled
 Default: Enabled
For more information, refer http://msdn.microsoft.com/en-
us/library/windows/hardware/ff556017%28v=vs.85%29.aspx
Receive Side Scaling (RSS):
 Description: This parameter controls the RSS functions. If on, the Microsoft RSS function
is enabled. If off, the Chelsio RSS function is enabled.
 Value: Enabled | Disabled
 Default: Enabled