VERSA VERSA--ORB™ Orbital Shaker CLS 4021--100 CLS--4021 3800 North Mill Road • Vineland, NJ 08360 • USA Tel: 1-800-843-1794 • Fax: 1-800-922-4361 Web: www.cglifesciences.
FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Trouble free brushless DC motor Integrated power supply for 100 to 240VAC service. A 1 inch orbit. Low profile space saving housing. Non-slip trouble free toothed belt design for long life. 10 - 350 revolutions per minute. Illuminated LED display. Rotary speed knob has locking ring. Tray sizes available: (12”x12”, 15”x15”, 20”x20”, and 8 pos. Microtiter Plate Tray) Peg and Grommet tray mounting. Suction cup style feet for stability.
SET-UP 1. 2. 3. (See Figure 1) Connect the detachable power cord to the AC/DC converter (DC power supply) and connect to “INPUT 24Vdc” receptacle in rear of unit and then plug power cord into a suitable electrical outlet. Secure suction cup feet on work bench. Mount appropriate tray atop of shaker platform - position pegs into grommets.
OPERATION See figure 2 To operate, turn the main power switch to the “ON” position. Turn the speed control knob to set the desired rpm value. The units are designed to operate within a range of 10 - 350 revolutions per minute. Adjust the speed by turning the speed control knob, CW to increase speed, CCW to decrease it. The unit will ramp up (or down) to your selected speed. Turn the “LOCK” ring clockwise about an eighth of a turn to prevent any inadvertent changes to the set speed.
Warranty Chemglass, Inc. guarantees this unit against defects in material and workmanship for a period of two years from the date of purchase. If the unit should malfunction, it must be returned for evaluation. If the unit is determined to have a defect in materials or workmanship, then it will be repaired or replaced at no charge. Tampering with the unit or damage resulting from excessive current, heat, moisture, vibration, corrosive materials, or misuse will void this warranty.