Manualshelf

MSDS

ManualsBrandsChemlink ManualsAdhesive SealantBlack M-1 Polyether Adhesive Sealant - 10oz Cartridge
1234
CHEM LINK INC. Safety Data Sheet
M-1
Extinguishing Media: Water, CO2, Dry Chemical, Foam.
Unusual Fire and Explosion Hazards: None.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Section 6. Accidental release measures
Handling Precautions:
Regulatory Requirements:
Section 7. Handling and Storage
Handling Precautions:
Storage Requirements:
Section 8. Exposure Controls / Personal Protection
Hand protection: Wear impervious gloves such as vinyl to minimize contact with skin.
Eye protection: Wear safety glasses or goggles to avoid eye contact.
Skin protection: Wear impervious gloves such as vinyl to minimize contact with skin.
Environmental exposure control:
No specific controls are needed.
Section 9. Physical and Chemical Properties
Physical State: Water Solubility: Insoluble % Volatile: 1.06%
Appearance and Odor: Paste, mild mint scent VOC: 14.85 g/l
Freezing/Melting Point(°C):
N/A Flash Point: NA°C (Tag closed cup)
Odor Threshold (ppm): N/A Autoignition Temperature: NA
Vapor Pressure: <1 pH: N/A
Vapor Density (Air=1): >1
Density: 11.71 lbs./gal. (calculated)
Specific Gravity: 1.40 LEL: NA UEL: N.A.
Flashpoint:
Lower Flammable Limit:
Upper Flammable Limit:
Flash Point Method: Based on FP of
the most volatile component.
Special Fire Fighting
Instructions:
Use personal protection recommended in section 8. Avoid eye, skin and
clothing contact.
Follow applicable OSHA regulations (29 CFR 1910.120).
Use personal protection recommended in section 8. Avoid eye, skin and
clothing contact.
Product is not considered flammable under normal conditions, and
product is not considered explosive.
Thermal decomposition may produce toxic fumes of Carbon
Monoxide, Carbon dioxide, Sulfur oxides and Hydrogen
sulfide.
Collect spill with absorbent material such as cardboard, allow to cure and
place into a container approved for waste disposal.
None. Full emergency equipment with self –contained breathing
apparatus and full protective clothing should be worn by firefighters.
Section 5. Fire Fighting Measures
Cleanup:
Prevention of fires and
explosions:
Autoignition temperature:
Sensitivity to Impact:
Hazardous Combustion Products:
Sensitivity to Static Discharge:
Store in a cool dry area (this product polymerizes when in contact with
moisture.)