Security Datasheet

OpticPrep™ PreSaturated Wipe (UFI)
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2020/878
SECTION 9: Physical and chemical properties
Relative density
Vapour density
Not available.
2.07 [Air = 1]
:
:
9.2 Other information
Particle characteristics
Median particle size
:
Not applicable.
9.2.1 Information with regard to physical hazard classes
9.2.2 Other safety characteristics
Evaporation rate
>1 (butyl acetate = 1)
:
Miscible with water
Not available.
Not applicable
Explosive properties
:
Not available.
Oxidising properties
:
10.6 Hazardous
decomposition products
10.4 Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurise, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapour to accumulate in low or confined areas.
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
The product is stable.
10.2 Chemical stability
Reactive or incompatible with the following materials:
oxidising materials
:
:
:
10.5 Incompatible materials
:
10.3 Possibility of
hazardous reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
SECTION 10: Stability and reactivity
10.1 Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Acute toxicity
propan-2-ol
LD50 Dermal
Rabbit
12800 mg/kg
-
LD50 Oral
Rat
5000 mg/kg
-
Product/ingredient name
Result
Species
Dose
Exposure
Conclusion/Summary
:
Not available.
Irritation/Corrosion
SECTION 11: Toxicological information
11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008
Acute toxicity estimates
Product/ingredient name
propan-2-ol
5000
12800
N/A
N/A
N/A
Oral (mg/
kg)
Dermal
(mg/kg)
Inhalation
(gases)
(ppm)
Inhalation
(vapours)
(mg/l)
Inhalation
(dusts
and mists)
(mg/l)
Date of issue/Date of revision
:
1/17/2023
Date of previous issue
:
1/17/2023
Version
:
57
9/15