Datasheet

Material Compatibility
Ceramic Good
Clean Metals Good
Glass Good
Natural Fibers Good
Silicone Resins Good
Painted Surfaces Good
Plastic Surfaces Good
Synthetic Fibers Good
Vulcanized Silicone Rubber Good
Wood Good
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Contact Chemtronics

for complete usage
and application instructions. When using
CircuitWorks

Heat Sink Grease, follow
these guidelines: Apply to all mounting and
threaded surfaces of the device and the
chassis. Apply by pushing product ahead of
neck.
Dispensing: CircuitWorks

Heat Sink
Grease is a ready-to-use one-component
material. Collapsible tubes may be squeezed
by hand or with the aid of mechanical
wringers.
AVAILABILITY
CT40-5 5 oz. Tube
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics

provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.0%
HCFC 0.0% HFC 0.0%
Cl. Solv. 0.0% ODP 0.00
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The
ODP of this product is 0.0. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS

does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS

8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. E (03/01)
DISTRIBUTED BY: