User Manual

PRODUCT DESCRIPTION
IPA Presaturated Wipes remove solder paste,
inks and other contaminants. These highly
effective cleaning wipes are ideal for all
general cleaning applications. IPA
Presaturated Wipes are well suited for touch-
up cleaning of automatic printer stencils and
cleaning of semi-automatic printer stencils
during and at the end of production runs.
IPA Presaturated Wipes contain ultra-pure
Electronics Grade IPA. The wipes are
available in a C-fold wipe contained in a
convenient dispensing box or in a tub.
 Plastic Safe
 Lint free
 RoHS Compliant
 Flammable
 Regular Cleaning Strength
 California - CARB Electronics Cleaner
75% Compliant
TYPICAL APPLICATIONS
IPA Presaturated Wipes are engineered for
cleaning:
 Screens & Stenc ils
 Fiber Optics & Connectors
 Cables
 Hard-line Coax Cable
 Metal & Fiber Optic Cable Splices
 PC Boards
 Control Systems
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
174° F Initial
Evaporation Rate (butyl acetate=1) <1
Flash Point (TCC) 68º F
Specific Gravity 0.88
Vapor Pressure @68°F 198 mm Hg
Odor
Mild Alcohol
Solubilit y in Water Soluble
Kauri-Butanol (KB) Number 56
VOC* Content:
CARB 70 %
SCAQMD 616 g/L
Federal 70 %
RoHS Compliant
Shelflife 2 yea rs
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District ( SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
IPA Presaturated Wipes are generally
compatible with most materials. As with any
chemical product, component compatibility
must be determined on a non-critical area
prior to use.
CHEMTRONICS
Technical Data Sheet
IPA
Presaturated Wipes
TDS# SIP100P