Manual

PRODUCT DESCRIPTION
Max-Kleen
™
Citrus is ideal for removal of all
types of soils including oxidized grease, sludge,
wax, tar and oil. The moderate evaporation rate
increases the cleaning power for hard-to-remove
soils. The low surface tension provides for
superior wetting to clean in even the tightest
spots.
• Citrus-based formula with moderate
evaporation rate
• Quickly removes all types of tough soils
including oxidized oil and grease
• Safe for use on most metals and plastics
• Does not contain chlorinated solvents
• Flashpoint greater than 122º F
• Non-corrosive and nonconductive
• Low Toxicity
• Leaves no residue
TYPICAL APPLICATIONS
Max-Kleen
™
Citrus can be used for all repair,
maintenance, and manufacturing applications
including:
• Removes grease, oil and lubricants
• Ideal for metal parts cleaning and tools
• All repair and maintenance cleaning
• Cleans contacts, relays, switches, circuit
breakers and test probes
• Cleans electric motors and gasoline engines
• Removes tough soils from gears and pulleys
• Use for maintenance of air compressors
• Cleans inks and residues from printing
presses
• Effective adhesive residue remover
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
300° F (Initial)
Evaporation Rate
(butyl acetate=1)
<1
Flash Point (TCC)
>122
° F
Specific Gravity
0.78
Vapor Pressure @68°F 2.0 mmHg
Appearance Clear, colorless liquid
Odor
Mild Citrus
Solubility in Water
Negligible
Dielectric Breakdown
(ASTM D-877)
62 kV
Kauri-Butanol
(KB) Number
45
Shelflife 5 years
COMPATIBILITY
Max-Kleen
™
Citrus is compatible with most
metals and plastics. As with any solvent,
compatibility with substrate should be
determined on a non-critical area prior to use.
CHEMTRONICS
Technical Data Sheet
Max-Kleen
™
Citrus
The citrus-based extra-strength, heavy-duty degreaser
TDS # 589