Owner manual

PRODUCT DESCRIPTION
Max-Kleen
™
Xtreme
™
is ideal for removal of
all types of soils including tar and grease from
tools, clutches, bearings and housings. It is a
non-corrosive and nonconductive cleaner. This
extra-strength degreaser evaporates quickly
without leaving a residue behind. Max-Kleen
™
Xtreme
™
is registered with the NSF as a K1, K2
cleaner/degreaser for use in food processing
facilities.
• Quickly removes all types of tough soils
including oxidized oil and grease
• Dielectric strength of 18 kV
• NSF K1, K2 registered
• Contains n-propyl bromide
• Nonflammable, no flash point
• Penetrates to clean hard to reach areas
• Non-corrosive and non-conductive
• Leaves no residue
• Ozone safe
• Test on plastics
TYPICAL APPLICATIONS
Max-Kleen
™
Xtreme
™
can be used for all
repair, maintenance, and manufacturing
applications including:
• Removes grease, oil, lubricants, wax and tar
• Cleans contacts, relays and switches, circuit
breakers and fuse blocks
• All repair and maintenance cleaning
including: controls, conveyors and gear
drives
• Cleans electric motors and gasoline engines
• Removes tough soils from gears and pulleys
• Use for maintenance of air compressors
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
156° F
(Initial)
Evaporation Rate
(butyl acetate=1)
>1
Flash Point (TCC)
None
Specific Gravity
1.35
Vapor Pressure @68°F 112 mmHg
Appearance Clear, colorless liquid
Odor
Mild
Solubility in Water
Negligible
Dielectric Breakdown
(ASTM D-877)
18 kV
Kauri-Butanol
(KB) Number
125
Shelflife 5 years
NSF-Registered K1, K2 #139458 (aerosol)
#139459 (bulk)
COMPATIBILITY
Max-Kleen
™
Xtreme
™
is compatible with most
metals. As with any solvent, compatibility with
plastics should be determined on a non-critical
area prior to use. Materials such as polystyrene
and ABS are not compatible with the cleaning
solvent in Max-Kleen
™
Xtreme
™
.
CHEMTRONICS
Technical Data Sheet
Max-Kleen
™
Xtreme
™
The extra-strength, nonflammable heavy-duty degreaser
TDS # 2284