Datasheet

Rev. He (5/20) Page 1 of 2
1-770-424-4888  www.chemtronics.com
Typical Product Data and Physical Properties
Boiling Point: 180ºF / 82ºC Initial
Flash Point (TCC): 68ºF / 20ºC
Specific Gravity: 0.88
(Water = 1)
Vapor Density 198 mm Hg
@ 68ºF / 20ºC
Odor Mild Alcohol
Solubility in Water Soluble
Evaporation Rate: <1
(ether =1)
VOC Content*:
CARB 70%
SCAQMD 616 g/L
Federal 70%
Kauri-Butanol 56
(KB) Number
Shelf Life 2 years after opening
RoHS Compliant Yes
*Volatile Organic Compound (VOC) information is calculated on a weight basis
using the VOC definition of California Air Resources Board (CARB) Consumer
Product Regulations, South Coast Air Quality Management District (SCAQMD)
Rule 102 and the Federal definition published in 40 CFR 51.100(s).
IPA Presaturated Wipes
Product# SIP100P, SIP100TR, SIP100K, IPA100B
Product Description
IPA Presaturated Wipes remove solder paste, inks and other
contaminants. These highly effective cleaning wipes are ideal
for all general cleaning applications. IPA Presaturated Wipes
are well suited for touch-up cleaning of automatic printer
stencils and cleaning of semi-automatic printer stencils during
and at the end of production runs.
Presaturated Wipes contain ultra-pure 70% electronics grade
isopropyl alcohol and 30% pure deionized water. The wipes
are available in a center pull pop-up canister.
 Plastic Sa
fe
 Lint free
 RoHS Compliant
 Flammable
 Regular Cleaning Strength
 California - CARB Electronics Cleaner 75% Compliant
Typical Applications
IPA Presaturated Wipes are engineered for cleaning:
 Screens & Stencils
 Cables
 Hard-line Coax Cable
 Metal & Fiber Optic Cable Splices
 Printed Circuit Boards