Security Datasheet

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2015/830
IPA Presaturated Wipes (UFI)
SECTION 8: Exposure controls/personal protection
for the measurement of chemical agents) Reference to national guidance
documents for methods for the determination of hazardous substances will also be
required.
Hand protection
A respirator is not needed under normal and intended conditions of product use.
Use chemical-resistant, impervious gloves.
Safety glasses.
Eye/face protection
Respiratory protection
:
:
:
Skin protection
Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. When there is a risk of ignition from static electricity,
wear anti-static protective clothing. For the greatest protection from static
discharges, clothing should include anti-static overalls, boots and gloves. Refer to
European Standard EN 1149 for further information on material and design
requirements and test methods.
:
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:
Use only with adequate ventilation. Use process enclosures, local exhaust
ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering controls
also need to keep gas, vapour or dust concentrations below any lower explosive
limits. Use explosion-proof ventilation equipment.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
8.2 Exposure controls
Hygiene measures
:
No DNELs/DMELs available.
PNECs
No PNECs available
DNELs/DMELs
Individual protection measures
Body protection
:
Other skin protection
Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Not available.
Physical state
Melting point/freezing point
Initial boiling point and boiling
range
Liquid.
Not available.
Alcohol-like.
Odour
pH
Colourless.
Colour
Evaporation rate
<1 (butyl acetate = 1)
Flash point
Closed cup: 16°C [Tagliabue.]
Not available.
Not available.
Odour threshold
:
:
:
:
:
:
:
:
:
9.1 Information on basic physical and chemical properties
Appearance
SECTION 9: Physical and chemical properties
Flammability (solid, gas)
:
Not available.
Date of issue/Date of revision
:
10/21/2020
Date of previous issue
:
10/21/2020
Version
:
35
7/13