4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual CHENBRO Storage Chassis 4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 09 / 014 / 2010 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 1 w w w . c h e n b r o .
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Copyright Copyright © 2006 Chenbro Micom Co., Ltd.. All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by Chenbro Micom Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Contents 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 3 w w w . c h e n b r o . c o m Copyright......................................................................................................................................................2 Technical Support .....................................................................................
-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Revision History Date Modifications May / 14 / 2010 First release Sep / 14 / 2010 Update part no. for PCB color ( changed from green to yellow) w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual 6Gb/s Backplane Specification 80H10321516A1 (Version A1) Host Interface Mini-SAS (SFF-8087) HDD Interface SAS (22+7) and SATA-II compatible Hot-Swap Yes, allows user to replace HDD on line LED indicates HDD status (Defined by Chenbro) Power LED – Blue ( When HDD is present ) Display Access LED –Green (When HDD is busy ) Error indicator – Red (Error when retreating signals ) Cooling Five Fan connectors Environment Monitor Temperature s
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Backplane Layout Backplane Connectors Front View CN11 CN7 CN5 CN21 CN6 CN31 Rear View CN1 JF1 JF2 JF3 CN41 JF4 JF5 CN4 CN3 CN2 CN12 CN10 CN8 (1) [CN11 / CN21 / CN31 / CN41] : Connect to 22-pin SATA-II or 29-pin SAS HDD (2) [JF1 / JF2 / JF3 / JF4 / JF5] : Fan connectors 1~5 (3) [CN2] : HDD Failure LED Signal Pin Header HDD 4 HDD 3 HDD 1 HDD 2 Connect the 4-pin HDD LED cable (26H113322-001) from CN2 to the CATHODE of the HDD failu
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Pin Definition: SFF-8087 Mini-SAS 36-pin cable plug and receptacle connectors B18 B1 B18 A1 A18 A18 Sideband Definition: The following table defines the SGPIO signal assignments for the Mini-SAS receptacle connector Pin Number Pin Signal A8 Sideband 0 SClock A9 Sideband 1 SLoad A10 Sideband 2 Ground B9 Sideband 3 Ground B10 Sideband 4 SDataOut B11 Sideband 5 SDataIn A11 Sideband 6 Reserved B8 Sideband 7 *SGPIO Enable
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Backplane Assembly The Chenbro 4-Port 6Gb/s Mini-SAS Backplane can be assembled on Chenbro Storage Server Chassis only. Please refer to the Chassis Quick Installation Guide for detail information. Figure 1: Front and Rear View of 3U Backplane assembly set (Using two 2U Backplane assembly sets) 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 8 w w w .
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual (A) Example of assembly procedure for RM31212B chassis 1. Get the complete 3U backplane assembly set (with three backplanes) ready and make sure the backplane guide rail is installed before backplane assembly. 2. Make sure the backplane ID is configured properly from bottom to top with starting from #1 to #3. 3. Slide the backplane assembly set into the chassis. 4. Fix the backplane assembly set with screws on both sides of chassis. 5.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual (B) Example of assembly procedure in RM41416B chassis 1. Get the complete 4U backplane assembly set (with two 2U backplane assembly sets) ready and make sure the backplane guide rail is installed before backplane assembly. 2. Make sure the backplane ID is configured properly from bottom to top with starting from #1 to #4. 3. Slide the backplane assembly set into the chassis one by one. 4.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual LED Board Specification According to HDD sequential spin up setting, please refer to the following instruction. The text printing of HDD sequential spin up function setting on older version 1U~5U LED boards are incorrect. The incorrect LED board version are: 80H033117-002 ver. A0~A2 (1U) 80H033215-005 ver. A0~A2 (2U~4U) 80H173519-003 ver. A0~A1 (5U) The corrected LED board version are: 80H033117-002 ver. A3 (1U) 80H033215-005 ver.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual 2U~4U LED Board (Part Number 80H033215-005) 2 I C connector Signal connector to backplane System signal connector to M/B Function Switch USB 2.0 connector to M/B Power supply alarm mute connector (Yellow & Black Cable from PSU) Power supply alarm signal connector (Red & Black Cable from PSU) HDD Activity LEDs USB 2.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual 5U LED Board and Display Board 2 I C connector LED Board (Part Number 80H173519-003) System signal connector to M/B USB 2.0 connector to M/B Signal connector to backplane Function Switch Power supply alarm mute connector (Yellow & Black Cable from PSU) Power supply alarm signal connector (Red & Black Cable from PSU) Signal connector to display board Power Switch USB 2.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Power Supply Alarm Mute Connector Definition Pin 1: Ground Pin 2: Alarm mute signal output to PSU (Active low) Pin 2 Pin 1 Power Supply Alarm Signal Connector Definition Pin 1: Ground Pin 2 Pin 2: PSU fail signal (TTL) input from PSU (Active low) Pin 1 Only redundant PSU come with the failure alarm and alarm mute reset control via signal connector. Make sure the redundant PSU that user applied come with the connectors above.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual 6Gb/s Mini-SAS Cables The Mini-SAS backplane provides most benefits to users using the same backplane to support various SAS/SATA RAID card via different conversion cables. Chenbro provides various cables for different interfaces which include the followings: (A) (B) (C) (D) (F) 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 15 w w w .
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Table of Mini-SAS cable solution Connector Cable Type A B1 B2 B3 B4 C D E Mini-SAS Infiniband / Multilane (SFF-8087 36pin) (SFF-8470) Mini-SAS Mini-SAS (SFF-8087 36pin) (SFF-8087 36pin) Mini-SAS Mini-SAS (SFF-8087 36pin) (SFF-8087 36pin) Mini-SAS Mini-SAS (SFF-8087 36pin) (SFF-8087 36pin) Mini-SAS Mini-SAS (SFF-8087 36pin) (SFF-8087 36pin) Mini-SAS (SFF-8087 36pin) SATA-7Pin x4 Length Host side SATA-7Pin x4 TBD
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Backplane and LED Board Wiring 1. LED board signal cable: Get the HDD activity signals and internal protocol for the spin up of each backplane. This cable connects the backplanes (start from #1) and LED board. 2. Discrete HDD failure signal cable: This cable is optional for the HBA or RAID card with HDD failure signal support. It is connected by direct cable connection, and each backplane needs one 4P-4P discrete cable. 3.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Example for RM21508B chassis Mini-SAS backplane wiring Mini-SAS cable LED board signal cable LED Board HBA / RAID Card Chassis fan wiring (Connecting start from Fan1) CN4 jumper set on pins 3 & 4 HDD8 HDD7 HDD6 HDD5 CN4 jumper set on pins 1 & 2 HDD4 HDD3 HDD2 HDD1 Chassis Fan x4 w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Example for RM31212B Mini-SAS backplane wiring Mini-SAS cable LED board signal cable LED Board Chassis fan wiring HBA/RAID Card (Connecting start from Fan1) CN4 jumper set on pins 5 & 6 HDD12 HDD11 HDD10 HDD9 CN4 jumper set on pins 3 & 4 HDD8 HDD7 HDD6 HDD5 CN4 jumper set on pins 1 & 2 HDD4 HDD3 HDD2 HDD1 Chassis Fan x4 w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Example for RM41416B Mini-SAS backplane wiring Mini-SAS cable LED board signal cable LED Board HBA/RAID Card Chassis fan wiring (Connecting start from Fan1) HDD16 HDD12 HDD8 HDD4 HDD15 HDD11 HDD7 HDD3 HDD14 HDD13 HDD10 HDD9 HDD6 HDD5 HDD2 HDD1 Chassis Fan x5 w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Example for RM51924B chassis Mini-SAS backplane wiring Display Board HBA/RAID Card #1 HDD12 HDD8 HDD4 LED Board HDD11 HDD7 HDD3 HDD6 HDD2 HDD10 HDD9 HBA/RAID Card #2 HDD24 HDD5 HDD20 HDD1 HDD16 Chassis Fan x3 HDD23 HDD19 HDD15 HDD22 HDD18 HDD14 HDD21 HDD17 HDD13 Chassis Fan x5 (RM519) / Chassis Fan x4 (RM512) LED board signal cable (for Backplane) LED board signal cable (for LED Board) Chassis fan wiring (Connectin
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual Chassis Fan Connecting Example LED board signal cable Chassis fan wiring (Connecting start from Fan1) Optional Chassis fan wiring RM11704B & RM12404B Fan Connecting Example LED Board Fan 1 Fan 2 Fan 4 Fan 3 RM13204 Fan Connecting Example LED Board Fan 1 Fan 2 Fan 4 Fan 3 Fan 5 RM21508B Chassis Fan Connecting Example BP2 BP1 Fan 1 Fan 2 Fan 3 Fan 4 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual RM23212 Chassis Fan Connecting Example BP3 BP2 BP1 Connecting fans to backplane with full rotation speed performance PWM Fan 1 PWM Fan 3 PWM Fan 2 Connecting fans to motherboard with PWM control function Motherboard RM31212B Chassis Fan Connecting Example LED Board BP3 BP2 Fan 1 Fan 2 Fan 3 Fan 4 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual RM41416B Chassis Fan Connecting Example LED Board BP4 BP3 BP2 BP1 Fan 1 Fan 2 Fan 4 Fan 3 Fan 5 RM51424 Chassis Fan Connecting Example LED Board BP3 BP6 BP2 BP5 BP4 BP1 Fan 6 Fan 7 Fan 8 Fan 1 Fan 2 Fan 3 Fan 4 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 24 w w w . c h e n b r o .
4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1 User’s Manual RM51924 Chassis Fan Connecting Example LED Board BP3 BP6 BP2 BP5 BP4 BP1 Fan 4 Fan 5 Fan 6 Fan 1 Fan 2 Fan 7 Fan 8 Fan 3 w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.