4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual CHENBRO Server Chassis 4-Ports 6Gb/s SAS / SATA II Backplane User’s Manual Oct / 15 / 2010 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 1 w w w . c h e n b r o .
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Copyright Copyright © 2010 Chenbro Micom Co., Ltd. All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by Chenbro Micom Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company.
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Contents Copyright…………………………………………………………………………………………….........2 Technical Support……………………………………………………..…………………………………2 Revision History………………………………………………………………………………………….4 Hardware Specification………………………………………………………………………………… 5 Accommodated Chassis………………………………………………………………………………..5 Backplane Photos………………………………………………………………………………………..6 Backplane Layout………………………………………………………………………………………..7 Backplane wiring……………………………………………………………………………………….11 w w w .
-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Revision History Date Sep / 15 / 2010 Modifications First release w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Hardware Specification Specification Host Interface SATAII HDD Interface SATA / SAS Hot-Swap Yes, allows user to on line replace Hard Disk Drive LED indicates Hard Disk Drive status ( Defined by Chenbro ) Power LED – Blue ( When HDD is present ) Display Access LED –Green ( When HDD is busy ) Error LED –Red ( When HDD is fail ) Cooling 3pin Fan connector x2 1. SATA II x 4 2. SAS 29pin x 4 ( for HDD ) Connectors 3.
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Backplane photos Front side Rear side w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Backplane Layout Front view ( HDD slot IN ) [CN11 / CN21 / CN31 / CN41]: connect to 29pin SAS or 22pin SATA II HDD 2. [LD11 / LD21 / LD31 / LD41]: Blue LED indicate HDD Power, 3. [LD12 / LD22 / LD32 / LD 42]: Green LED indicate HDD activity, Red LED indicate HDD failure. 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 7 w w w . c h e n b r o .
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Rear View ( Host Connectors IN ) [CN12 / CN22 / CN32 / CN42]: connect to 7pin SATA II host 5. [JF1 / JF2]: 3P3C Fan connector Pin1 Pin1 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 8 w w w . c h e n b r o . c o m 4.
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual 6. [JP1]: Power failure signal ( To Redundant Power Supply ) 7. [JM1]: Power Failure Alarm Mute ( To Redundant Power Supply ) Pin1 Pin1 8. [F0104]: Discrete HDD Fail LED Signal Input connector ( From RAID Card ) Pin1 HDD1 HDD2 HDD3 HDD4 [CN01 / CN02]: standard big 4pin power connector 10. [CN08]: Fan / Power / Temperature Fail LED output connector ( To Front Panel LED Display ) Pin1 Pin6 15Fl., No.
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual 11. [SW1]: Fan & Temperature setting 12. [CN04]: SGPIO HDD access function jumper [CN05]: SGPIO HDD fail function jumper CN05 CN04 Close Close Enable HDD failure and activity signal via SGPIO Low Close Open Enable HDD failure signal via SGPIO (Default) Low Open Close Enable HDD activity signal via SGPIO Low Open Open Disable HDD failure and activity signal via SGPIO High 13.
4-Port 6Gb/s SAS/SATA II Backplane 80H10331405A0 User’s Manual Backplane Wiring To M/B SGPIO connector To M/B To M/B To front Bezel To M/B To RAID card To R/PSU To Fan Fan cable standard big 4pin power HDD Fail LED Signal Input Fan / Power / Temperature Fail LED output Power failure input Power Failure Alarm Mute Output External HDD Activity LED Signal Input 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.