Instruction Manual

ManualsBrandsChenbro ManualsComputer HardwareRM31616 LED Board(80H033216-004), Features and Jumper Settings - Manual

LED Board 80H033216-004 ver. 1.2~1.3

User

’

s Manua

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw

www.chenbro.com

CHENBRO

User’s Manual

LED Board

80H033216-004

Version 1.2~1.3

May / 28 / 2008

Summary of content (8 pages)

PAGE 1
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual CHENBRO User’s Manual LED Board Version 1.2~1.3 May / 28 / 2008 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 1 w w w . c h e n b r o .
PAGE 2
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual Copyright Copyright © 2006 CHENBRO Micom Co., Ltd.. All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by CHENBRO Micom Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company.
PAGE 3
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual Contents Copyright......................................................................................................................................................2 Technical Support......................................................................................................................................2 Contents ................................................................................................................................
PAGE 4
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual Revision History Date May / 28 / 2008 Modifications z First Release, Revision V1.0 w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
PAGE 5
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual Hardware Specification Specification Power LED – Blue ( When Power is On ) Display HDD LED – Yellow (When HDD is busy ) Error LED – Red (When system is error ) LAN1, LAN2 LED – Green (When network is busy) z One power, one reset and one alarm mute button z One buzzer for alerting Connectors and z Two standard USB 2.
PAGE 6
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual Components Connectors & Switches Definition Power supply alarm mute connector (Yellow & Black Cable from PSU) Backplane signal connector System signal connector to M/B USB 2.0 connector to M/B Power supply alarm signal connector (Red & Black Cable from PSU) Function Switch USB 2.
PAGE 7
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual Power Supply Alarm Mute Connector Definition Pin 1: Ground Pin 2: Alarm mute signal output to PSU (Active low) Pin 1 Pin 2 Power Supply Alarm Signal Connector Definition Pin 1: Ground Pin 2: PSU fail signal (TTL) input from PSU (Active low) Pin 2 Pin 1 Only redundant PSU come with the failure alarm and alarm mute reset control via signal connector. Make sure the redundant PSU that user applied come with the connectors above.
PAGE 8
LED Board 80H033216-004 ver. 1.2~1.3 User’s Manual Chassis Assembly Example See below for the example of how the wiring to be performed. Example for RM31616 backplane wiring Slim ODD adaptor board Slim FDD adaptor board LED Board Chassis Fan x4 SAS / SATA-II RAID / HBA Card Mini-SAS cable (BP to Host Adaptor) w w w . c h e n b r o . c o m Chassis fans wiring Fan Signal cable (BP to LED board) Slim ODD power cable Slim FDD power cable 15Fl., No.