User's Manual
Table Of Contents
- IEEE 802.11 g 54Mbps
- Chapter1 Introduction
- Chapter2
- Installation and Configuration Procedures
- Chapter3
- Wireless LAN CardBus Adapter Utility
- Chapter4
- Using WinXP Built-in Wireless Network Configuration Utility
1.5 Wireless CardBus Adapter Hardware
Description
The LED illuminates to indicate that the card is functioning. Please refer to the hardware
diagram below. The upper solid red LED indicates this card is associated with an access point
and power on. If the LED is off, it means that the network adapter doesn’t associate an access
point. If the LED is blinking, it means that the network adapter is connecting with access points
or transmitting or receiving data.
Hardware Diagram
1.6 Ejecting the Wireless LAN CardBus
Adapter
LED Indicator
You are advised to always disable the WLAN CardBus adapter prior to removing the adapter
from the PCMCIA slot. The wireless LAN adapter support hot-swappable feature so you don’t
have to power off the notebook to remove the adapter.
Steps:
Double click the Unplug or Eject Hardware Icon
resides on your system tray and
click Stop from the Unplug or Eject Hardware dialog box.
Wireless LAN CardBus Adapter