Motorola Wireless Bluetooth USB Adapter SYN1244A User’s Guide 1
Table of Content CHAPTER 1 .............................................................................................................................. 6 INTRODUCTION ....................................................................................................................... 6 INTRODUCTION TO BLUETOOTH...................................................................................... 6 INTRODUCTION TO THE WIRELESS BLUETOOTH USB ADAPTER ............................... 6 CHAPTER 2 ............
5.9 PAIRING WITH BLUETOOTH CELLULAR PHONE WITH GPRS FUNCTION AND ACCESS THE INTERNET .................................................................................................. 42 CHAPTER 6 ............................................................................................................................ 47 CONFIGURATION PANEL ..................................................................................................... 47 6.1 ACCESS THE BLUETOOTH CONFIGURATION PANEL..................
7.3 ENCRYPTION............................................................................................................... 96 7.4 LINK KEY ...................................................................................................................... 96 7.5 PAIRING DEVICES ....................................................................................................... 96 7.6 PASSKEY..............................................................................................................
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Chapter 1 Introduction INTRODUCTION TO BLUETOOTH The term “Bluetooth” refers to a worldwide standard for the wireless exchange of data between two devices. In order to exchange data, two Bluetooth devices must establish a connection. Before a connection is established, one device must request a connection with another. The second device accepts (or rejects) the connection. The originator of the request is known as the client. The device that accepts (or rejects) the request is known as the server.
Network Access and take the full advantage of a “connected” environment.
Chapter 2 Installing Bluetooth Software 2.1 Upgrading Bluetooth SOFTWARE IN WINDOWS98SE, ME, 2000 and XP Note: You don’t have to remove the Bluetooth adapter before start to upgrade the BTW software. The following installation procedures are operated in Windows 2000. For other supported O.S, there is only a slight difference in screen shots. Please upgrade the software by completing these steps: 1) Close any open programs and insert the utility CD into your CD-ROM Drive.
Note: In Windows 98SE and ME, there will be a message prompted and asks you to reboot your desktop or laptop. After you reboot your PC, Windows will automatically start to complete the installation. 5) The InstallShield Wizard is upgrading the BTW Bluetooth software. Note: In Windows 98SE, you will be asked to specify the directory of Windows 98 source files path during installation. Please enter the location of the Windows98 setup files and follow the on-screen description.
7) In Windows 2000 and XP, after you reboot your desktop or laptop, the HID installation message is displayed on the top of your Windows desktop. This step will take a few minutes and the message will be disappeared after the installation is complete. 8) You can see that the Bluetooth icon Places icon resides on the system tray and My Bluetooth is on Windows desktop. Now, you have completely finished the upgrade steps. 2.
If you have connected the Bluetooth Adapter to your computer, please remove it, cancel any hardware wizard that may show up, and start here. 1) Close any open programs and insert the utility CD into your CD-ROM Drive. The Autorun function will automatically guide you to start the software installation. (If the Autorun function does not automatically start, please open the Installation CD to find the Setup.exe file and double click the Setup.exe icon to continue.
4) In the Destination Folder screen you are asked to confirm the Destination Folder for the application software. If you would like, you may change the destination folder to another location as the directory.
5) The Ready to Install the Program screen informs you that the driver is ready for installation. Click on the Install button to continue. a. For Windows 2000 & XP users, please click on OK button from the following “Driver Signature Notice” dialog box to proceed with drive installation. b.
98 source files path during installation. Please enter the location of the Windows98 setup files and follow the on-screen description. 6) Plug the Bluetooth Adapter to an available USB port firmly and click OK to continue with software installation. 7) When the files have been copied, you will be presented with a screen informing of its completion. Click on Finish button to finish the installation process.
8). In Windows98SE, ME and 2000, please click on Yes button to reboot your PC. 2.3 Start Using Bluetooth After you have the Bluetooth software installed and reboot your PC for the first time, please right-click on the Bluetooth icon on the system tray and highlight Start Using Bluetooth. In order to use the Bluetooth adapter on your desktop or laptop you have to do some initial setup. The Bluetooth setup wizard will help you quickly configure your Bluetooth Adapter step by step.
Steps Check the box if you want to access the Bluetooth Software from the three options. Click Next. Input your computer’s name and select its type. Click Next.
Click Next button will guide you to make the Bluetooth services of your computer available to other Bluetooth devices. Decide which Bluetooth service that your computer will offer and check the box of it to enable it. You can also click Configure button to modify each service’s property. Click Next button to continue.
In Windows 2000 and XP, the following pop-up message will be displayed on the top of Windows desktop. Please wait while installing the HID software. If you want to configure another Bluetooth device, click Next button to continue; otherwise, click Skip button. If you click Skip button to end the setup wizard, you can start to launch the Bluetooth software by right-click mouse button the Bluetooth icon located on the system tray.
If you click Next button from the above dialog box, the Bluetooth devices in range will be disappeared in the box. Select one remote Bluetooth device and click Next button. You can enter the PIN code in the PIN Code field and click Initiate Pairing or click Skip Pairing to go to next step.
Check the box of the service you want to access with the remote Bluetooth device and click Configure button to setup the service. Take the File Transfer service for example. You can rename the folder name or clear the Secure Connection box.
The system has built a shortcut for the service you configure for easy access. After you have configured all the services, click Next button. If you want to configure another Bluetooth device, click Next button to continue; otherwise, click Skip button.
Click Finish button to complete the basic Bluetooth configuration. If you want to re-configure the Bluetooth services, you can right-click mouse button on the Bluetooth icon located on the system tray and highlight Bluetooth Setup Wizard. Now, you may start to launch the Bluetooth software and use the Bluetooth adapter on your computer.
Chapter 3 Setup Diagnostics 3.1 Hardware Diagram The Bluetooth USB Adapter is plug-and-play. During the software installation process, you will be prompted to plug in the USB adapter to an available USB port. When you plug in the USB Adapter to the USB port, the blue LED should light up. The Bluetooth adapter LED illuminate during connection or data transfer to indicate that the adapter is functioning. LED Indicator 3.
refer to the following picture and check if the Device Status field reports “The selected device is working properly.” and the “Device Address” is correctly displayed. If yes, it means that the Bluetooth adapter drivers and software have been installed successfully.
Chapter 4 Introduction To Bluetooth Software The wireless Bluetooth USB Adapter is bundled with Widcomm Bluetooth Software as the management software. The Bluetooth Software is the solution for the seamless integration of Bluetooth technology into personal computers. The software provides the user an easy interface to manage the Bluetooth Adapter. 4.
4.2 BLUETOOTH DEVICE IDENTITY Every Bluetooth device has a unique 48-bit binary Bluetooth Device Address (BDA) burned into its EEPROM. This address cannot be changed by the end-user. A device’s BDA is usually displayed in hexadecimal format; 00:D0:B7:03:2E:9F is a valid BDA. You can find the BDA from the Bluetooth Configuration Panel -> Hardware tab -> Device Address. Each Bluetooth device also has an operator-configurable, user-friendly name to help distinguish it from other Bluetooth devices.
Access the Bluetooth Configuration Panel—right-click mouse button on the Bluetooth icon, and then select Advanced Configuration. Access the Quick Connect option—right-click the Bluetooth icon, select Quick Connect, and then select the type of service to which you wish to connect. Start/Stop Bluetooth on this computer. 4.4 ACCESS MY BLUETOOTH PLACES My Bluetooth Places is part of Windows Explorer.
Enabled Disabled Connected Blue with White Blue with Red Blue with Green Figure 1: Bluetooth Icon Figure 2: Device Icons for Windows 9x, Me and 2K 28
Figure 3: Service Icons for Windows 9x, Me and 2K Service Icons for Windows 9x, Me and 2K Note: Services may be unavailable because they are in use or because the necessary hardware is not installed.
Figure 4: Device Icons for Windows XPDevice Ions for Windows 30
Figure 5: Service Icons for Windows XP NOTE: Services may be unavailable because they are in use or because the necessary hardware is not installed.
Chapter 5 Basic Operations 5.1 START OR STOP BLUETOOTH To start Bluetooth: In the Windows system tray, right-click the Bluetooth icon and select “Start the Bluetooth Device”. The Bluetooth icon is blue in color with a white insert when Bluetooth is running. To stop Bluetooth: In the Windows system tray, right-click the Bluetooth icon and select “Stop the Bluetooth Device”. . The Bluetooth icon is blue in color with a red insert when Bluetooth is stopped.
5.2 CREATE A CONNECTION FROM THE BLUETOOTH ICON IN THE SYSTEM TRAY In the Windows system tray, right-click the Bluetooth icon, select “Quick Connect” and then the Bluetooth service that you wish to use. If this computer has created a connection to the desired type of service in the past, the options on the shortcut menu are: The name(s) of any device(s) with which prior connections to this type of service have been established. Select a name from the list to re-establish connection.
From the Windows system tray: right-click the Bluetooth icon and select Bluetooth Setup Wizard. The Bluetooth Setup Wizard will be displayed. You can click the radio button of each item and follow the wizard's on-screen instructions. 5.4 CREATE A CONNECTION FROM BLUETOOTH EXPLORER From Bluetooth Explorer Right-click a device name and select “Connect to…” the desired service.
or In the Folders pane, select a device, and then, in the right pane, right-click a service provided by that device and select “Connect.” NOTE: Only available services are displayed in the menus.
5.5 FIND BLUETOOTH DEVICES Search for Devices looks for Bluetooth devices in the vicinity and displays the devices that it finds in My Bluetooth Places. To start a search for devices, in the Folders pane of My Bluetooth Places, select Entire Bluetooth Neighborhood, and then, from the Bluetooth menu, select Search for Devices. NOTE: The Bluetooth menu is only visible when My Bluetooth Places is active. 5.5.
From the Bluetooth Configuration screen, click “Discovery” Tab. Check the box of “Look for other Bluetooth devices” and input the interval. Some devices within connection range may not show up in the list of devices found because: Your device is configured to report only specific types or classes of devices (Bluetooth Configuration Panel > Discovery tab, on your device). The unlisted device is configured to be non-discoverable (Bluetooth Configuration Panel > Accessibility tab, on the un-listed device).
Discovery. To initiate a Service Discovery, in the Folders pane of My Bluetooth Places, right-click a device name and select Discover Available Services from the shortcut menu. Bluetooth services are those things that this computer can do for remote Bluetooth devices. For example, if this computer allows a remote Bluetooth device to send a fax using a fax modem that is physically attached to this computer, then this computer is providing the Bluetooth fax service.
The services supported by Bluetooth are: Bluetooth Serial Port—a wireless connection between two devices. This connection can be used by applications as though a physical serial cable connected the devices. Dial-up Networking—allows a device to use a modem that is physically attached to another Bluetooth device. Fax—allows a device to send a fax using a remote Bluetooth cell phone, modem, or computer.
The Information provided is: Status: “Connected” or “Not Connected” Device Name: the name of the device to which this computer is connected. Duration: the length of time that this connection has been established, displayed in hours, minutes and seconds.
time out (automatically disconnect) after a specific period of inactivity. Activity: the number of bytes sent and received over the connection. Signal Strength: a graphic indicator that ranges from Too Weak through Good to Too Strong. NOTE: To change the power transmission level of this computer: from the Bluetooth Configuration Panel, Hardware tab, click the Advanced button, and then change the setting in the Maximum Power Transmission drop-down list. The Advanced button is not available in all countries.
To use Send to Bluetooth (except Internet Explorer) 1. In the application: • Windows Explorer - select one or more files to be transferred. Folders cannot be transferred. • Microsoft Office - only the document in the active window can be transferred. • Microsoft Outlook - select one or more items to be transferred. 2. From the File menu, select Send To, and then select Bluetooth from the shortcut menu. 3. Select a device from the shortcut menu to send the data or Select Other...
Right-click mouse button on the cellular phone icon and select Pair Device from the shortcut menu. The following Bluetooth PIN Code Request dialog box will be pop-up. Please enter the Bluetooth PIN Code and click OK.
Meanwhile, the remote device - cellular phone screen will prompt a message for you to enter the Bluetooth PIN code. The Bluetooth PIN code you type here should be the same between these paired devices. The system starts to pair these two devices and the process will take a few seconds. If the pairing process is complete, there will be a check on the top of the cellular phone icon.
The following screen shows that the system starts to connect to the cellular phone. Please type the number your GPRS cellular phone provides and click Dial.
The following screen will be shown on your notebook screen indicating the connection process. Meanwhile, the remote device - your cellular phone, will prompt a request message indicating the notebook is requesting the service. Please click OK to accept the request. The following screen will be present on your notebook indicating the connection process. If the connection is established successfully, then the following screen will be displayed.
Chapter 6 Configuration Panel 6.1 ACCESS THE BLUETOOTH CONFIGURATION PANEL The Bluetooth Configuration Panel provides access to settings for Bluetooth services, client applications, hardware, security, discovery, accessibility, default paths, event notification and other Bluetooth related items. To Open the Bluetooth Configuration Panel From the Windows Control Panel, select Bluetooth Configuration.
6.2 GENERAL CONFIGURATION SETTINGS The settings on the General tab of the Bluetooth Configuration Panel determine information that is displayed to remote devices. Identity Computer Name-enter a unique name to identify this computer to other Bluetooth devices in the vicinity; this field cannot be left blank. Computer type-select either Desktop or Laptop from the shortcut menu to set the type of icon remote devices will use to represent this computer.
6.3 ACCESSIBILITY SETTINGS The Accessibility tab of the Bluetooth Configuration Panel lets you specify whether remote devices may access this computer, which remote devices have access, and whether an audio warning is played when a Personal Identification Number (PIN code) is required. Allow other devices to discover this computer Select “Let other Bluetooth devices discover this computer” to permit remote Bluetooth devices to find and report this computer.
Only devices listed below—only the listed devices are allowed to connect to this computer (see Accessibility, adding and deleting devices). Choose an audio notification file When Secure Connection is enabled for any of the Bluetooth Services on this computer a PIN code is required before that service can be accessed. To chose a notification sound that will play when a remote device attempts to access a service that requires a secure connection, click Select audio file... and select the sound (*.
NOTE: Multiple devices may be selected using SHIFT + click and/or CTRL + click. Delete a device from the list In the list of devices allowed to access this computer, select the device to be removed from the list, and then click Delete.
6.4 DISCOVERY SETTINGS The settings on the Discovery tab of the Bluetooth Configuration Panel determine whether this computer looks for other Bluetooth devices automatically, how often it looks and what type of devices it looks for. Periodic Search for Devices When “Look for other Bluetooth devices” is selected, Bluetooth automatically searches for devices every X minutes. X is an whole number between 1 and 60. To change the time between auto inquiries, highlight the existing time and enter the new time.
and Discovery, Deleting Specific Devices). Discover Specific Devices The type of device(s) that this computer looks for and reports when it is searching for other Bluetooth devices can be limited. Limit the remote devices reported Bluetooth can report only specific devices, specific class(es) of device(s), or specific type(s) of device(s) within a class. Specific devices: an individual computer or Bluetooth cellular telephone are examples of specific devices.
6.5 BLUETOOTH LOCAL SERVICES Common Configuration Settings The settings on the Local Services tab of the Bluetooth Configuration Panel determine the configuration of the services provided by your computer to remote devices. Each service can be configured individually for startup, security, name, and other settings. The Local Services tab also includes options to add and delete user-defined serial services. These properties can be set individually for each Bluetooth service.
The Bluetooth radio on both this computer and the remote device must support audio. The remote device handles both audio input and output for this computer; therefore, this computer does not require a sound card, microphone, or speakers. Configure the Audio Gateway Service Double-click the Audio Gateway service from the Local Service Tab. Set the common configuration properties of the service from General and Notification Tabs, and then click OK. 6.5.
Bluetooth Serial Port The COM port assigned to this service is the last item in the Bluetooth Serial Port service row. Configure the application on this computer that will use this service to send its data to this COM. To add a port 1. From the Bluetooth Configuration Panel, Local Services tab, click Add Serial Service. 2. In the properties dialog box, modify the properties: Enter a unique name (less than 99 alphanumeric characters). Select secure connection, if desired.
6.5.3 Dial-up Networking Service The Bluetooth Dial-up Networking service makes it possible for a remote Bluetooth device to use a modem that is physically connected to this computer. The remote device can then access the Internet or log on to a remote network. Configure the Dial-up Networking service: From the Windows system tray, right-click the Bluetooth icon, select Advanced Configuration > Local Services, and then double-click the Dial-up Networking service.
Select the physical modem to be used from the Modems: drop-down menu. Set the common configuration properties of the service, and then click OK. 6.5.5 File Transfer Service Configure the File Transfer Service From the Windows system tray, right-click the Bluetooth icon, select Advanced Configuration > Local Services, and then double-click the File Transfer Service.
Bluetooth exchange folder location: the directory configured in this section is the highest-level directory to which a remote Bluetooth computer has access. This directory and its sub directories are displayed in the remote device's My Bluetooth Places. NOTE: The Bluetooth Exchange Folder is shared by the PIM Item Transfer and the File Transfer services and can be configured from the Properties page of either of those services.
the vicinity. Copy to/from a remote device In the Folders pane of Explorer, from the Entire Bluetooth Neighborhood branch, select a device and expand that branch to view the Bluetooth Exchange Folder of the remote device. NOTE: “Public Folder” is not available, the remote device is not configured to allow remote file operations. Use drag-and-drop to copy any file or folder contained in the Public Folder of the remote device to the desired folder on this computer.
NOTE: Please refer to Chapter 9 – Troubleshooting for Windows 98 limitation. Hardware Requirements This computer must have a sound card, microphone, and speakers installed. The Bluetooth radio on both on this computer and the remote device must support audio. Configure the Headset Service From the Windows system tray, right-click the Bluetooth icon, select Advanced Configuration > Local Services, and then double-click the Headset service.
Access client at the same time. 6.5.7.1 Setup for Windows 2000 and Windows XP Steps From the Windows system tray, right-click the Bluetooth icon and select Advanced Configuration from the shortcut menu. In the Bluetooth configuration panel, select the Local Services tab, Network Access and then click Properties....
6.5.7.2 Network Access Server-side Setup for Windows 98SE & Windows ME: If the Bluetooth sever is running in Windows 98SE or Windows ME, you have to install an Internet Protocol Routing software. There are lots of trial versions of Internet Protocol Routing software in the Internet. For example: A downloadable trail version of Sygate Home Network is available on the Sygate Technologies Inc. The website is http://www.sygate.com/.
In the right panel of the Configuration screen, check the radio button Select manually from Local Network connections and select the 0000:Bluetooth PAN Driver. Be sure to check the Enable Address Server (DHCP) from the Options item. On the left side of the Configuration screen, check the radio button of Ethernet and select the LAN card the PC is using. Now, you have successfully configured your PC or laptop to the Bluetooth server.
Share a printer. From Windows Start menu -> Settings -> Printers, right-click the printer icon you want to share and select Sharing from the shortcut menu. Click the Sharing tab from the Printer Properties dialog box and click the radio button of “Shared as” to share this printer. Enable Guest Account. Right-click “My computer” icon on your desktop and select “Manage”. From the “Computer Management” window, click the + icon in front of “Local Users and Groups” to extend sub-menus.
Click Next to find the printer. Select the Bluetooth server, select the shared printer and click Next.
Click Finish button to complete the installation. 6.5.8 PIM Item Transfer Overview The PIM Item Transfer service allows Personal Information Manager items to be transferred between this computer and a remote Bluetooth device. Four data types are supported: Business Cards Calendar Items Email Messages Notes Each data type can be saved in any of the supported and installed PIMs. NOTE: PIMs which are not installed on this computer will not appear in the shortcut menus.
Configure From the Windows system tray, right-click the Bluetooth icon and select Advanced Configuration from the shortcut menu. In the Bluetooth configuration panel, select the Local Services tab, and double click PIM Item Transfer. In addition to the configuration options common to all Bluetooth services, this service also has settings that determine: How business card requests are handled.
send the same business card” option, above, that card will be added to the shortcut menu as an option. NOTE: Previously sent business card additions to the menu are limited to ten, after which the oldest contact will be replaced. Where to store inbound data items, on an individual basis.
open this shortcut menu and select a new PIM. NOTE: A new default business card must be selected from the database of the newly selected PIM. Choose a default business card 1. In the Select a Bluetooth Business Card dialog box that appears when “Always send the same business card” is selected, highlight the card. NOTE: Once a card is highlighted, if you “hover” the mouse pointer over that selection, a balloon appears with additional information about that contact. 2.
Services tab, and double click PIM Synchronization. Whether an individual item is accepted and where it is stored, when accepted, is configured in the PIM Item Transfer service. If that service is not configured to store a particular data type in Outlook, then that data type cannot be synchronized.
6.5.10 Imaging Overview The Bluetooth Imaging application allows this computer to send images to remote devices that provide the Bluetooth imaging service. Possible uses include the transfer of images to a Bluetooth camera, camera/phone, or any other device that offers the Bluetooth Imaging service.
The Bluetooth Configuration Panel > Client Applications > Imaging > General tab provides options to configure: • The application name - to change it, highlight the existing name and enter the new name. • Secure connection - to enable secure connection, select the option box. To disable secure connection, clear the option box. 6.5.
Example Both Authentication and Authorization request notifications are controlled by whether Secure Connection is enabled for an individual service. An example of how notifications might work when a remote device attempts to access a service on this computer, if all notifications are enabled: 1. Authentication: a balloon notification (audio optional) appears to prompt for a PIN code. If the PIN code does not match the code entered on the remote device, the connection will not be allowed.
2. Check the desired options; visual and sound may both be selected for a single event. 3. Choose a sound; click the Browse button and navigate to the sound file (*.wav) to be used for notification. To preview the sound file, click the play ( ) button. 4. Click OK to close the service's property dialog box. 6.
Bluetooth Services are software programs on this computer that provide a service to other devices. In the Bluetooth configuration panel, these applications are referred to collectively as “Local Services.” Note: Client Applications and Local Services usually have coinciding names; e.g., there may be a Fax service and a Fax application. 3.5.2 General Configuration All of the built-in Bluetooth applications allow you to rename the application and to require a secure connection when using the application.
6.6.1 Audio Gateway Configure The Bluetooth Configuration Panel > Client Applications > Audio Gateway > General tab provides options to configure: •The application name—to change it, highlight the existing name and enter the new name. •Enable or disable secure connection. To enable secure connection, place a checkmark in the box.
receive data to and from the respective communications port (COM port) assigned to the Bluetooth serial port. The wireless serial connection may then be used by the applications as though a physical serial cable connected the devices. Configure The Bluetooth Configuration Panel > Client Applications > Bluetooth Serial Port > General tab provides options to configure: The application name—to change it, highlight the existing name and enter the new name. Enable or disable secure connection.
service name and select Disconnect. 6.6.3 Dial-up Networking Overview The Bluetooth Dial-up Networking application allows this computer to use a modem that is physically connected to a remote device to access the Internet, log on to a remote network.
The Bluetooth virtual device to be used. NOTE: Unless you have a specific reason to do so, DO NOT CHANGE the default Bluetooth device or alter the device's configuration. Close a Dial-up Networking connection If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Dial-up Networking and then select the device that is providing the service (active connections have a checkmark in front of them).
The application name—to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box. Close a Fax Connection Fax connections close automatically when the Fax transmission is complete. 6.6.5 Headset Overview The Headset application allows this computer to use a Bluetooth headset (or any other device that offers the Bluetooth headset service) as the audio input and output device for this computer.
Establish a connection using one of these techniques: Windows system tray, Bluetooth icon From Bluetooth Explorer Using the Bluetooth Setup Wizard NOTE: Most Bluetooth headsets “ring” when a connection is attempted; answer the ring to complete the connection and begin using the headset as the audio input/output device for this computer.
6.6.6 File Transfer Overview The Bluetooth File Transfer application allows this computer to perform file operations on the Bluetooth Exchange Folder (and the folders and files it contains) of a remote device. Copy to/from a remote device In the Folders pane of Explorer, from the Entire Bluetooth Neighborhood branch, select a device and expand that branch to view the Bluetooth Exchange Folder of the remote device.
Potential menu options include: Open—opens the selected file on this computer, using the default application for this type of file. Print—sends the selected file to this computer’s default printer. Send To 3 ½ floppy (A)—the 3 ½ inch floppy drive on this computer Bluetooth Exchange Folder—the Bluetooth Exchange Folder on this computer. Rename—applies only to empty folders; file names and the names of folders that contain objects cannot be changed using this technique.
To connect to a Local Area Network via a physical connection on a remote Bluetooth device. or To connect to an ad hoc network provided by a remote Bluetooth device. The type of network connection that is available is determined by the configuration of the remote Bluetooth device.
The application name—to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box. 6.6.8 PIM Synchronization Overview The PIM Synchronization Application is used to synchronize the Personal Information Manager (PIM) database of this computer with the PIM database of a remote Bluetooth device. The supported PIMs are: Microsoft Outlook Microsoft Outlook Express Lotus Notes.
The application name—to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box. The PIM items to be synchronized and the PIM on this computer with which those items should be synced. NOTE: If synchronization is enabled for a specific item type, but is not enabled for that item type on the remote device, synchronization WILL NOT take place for that item.
a matching Outlook entry does not exist, it will be created. Synchronize Outlook-Express-this item type will be synced with its matching entry in Express, regardless of the PIM that contains this entry on the remote device. If a matching Express entry does not exist, it will be created Synchronize Lotus Notes-this item type will be synced with its matching entry in Lotus Notes, regardless of the PIM that contains this entry on the remote device.
configured. Configure PIM Item Transfer The Bluetooth Configuration Panel > Client Applications > PIM Item Transfer > General tab provides options to configure: The application name—to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box. How your business card is handled when it is requested by a remote device.
Email attachments. The only option is include or do not include attachments with email that is sent or received on this computer using this service. Close a PIM Item Transfer Connection This application closes the open connection automatically when its task is complete. 6.6.10 Printer Overview The Bluetooth Printer application allows this computer to use a Bluetooth printer.
The application name—to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box. Install a Bluetooth Printer Option One: 1. Perform a search for devices and then, from Entire Bluetooth Neighborhood, right-click a Bluetooth printer, select Add Printer from the shortcut menu and follow the on-screen instructions. 2. When the wizard asks you to select a printer make and model, do so.
Create a Bluetooth HID connection From My Bluetooth Places: Press the button on your HIDs. Take our Bluetooth Mouse as an example; the button is located on the bottom of the mouse. Meanwhile, you can see a blue LED near the mouse scroll button lights up. Click Bluetooth menu, and select Search for Devices. The Bluetooth mouse will be shown on the right pane. Double-click on the Bluetooth mouse icon and there will be a pop-up message prompted to ask you if you want to build the connection. Please click Yes.
build the HID connection the first time, there will be a pop-up message shown on the screen indicting that the system is installing the needed files. Now the Bluetooth mouse is ready to use. You can use it as a legacy PS/2 or serial mouse. Once an HID connection is established, that connection will persist. If the computer is shut down, when the computer is turned on again the connection will re-establish automatically.
Devices: Name: the name of the device, e.g., Broadcom USB Bluetooth Device Type: the type of device, e.g., USB. Device Properties: Device status: indicates that the device is operating properly or that there is a problem/conflict. Manufacturer: the name of the company that manufactured the device selected in the Devices section of this dialog box. Firmware Revision: the manufacturer's firmware version number.
The Advanced button: displays the Advanced Settings dialog box, which allows you to select the country code and transmission power settings. This option is not available on all systems. 6.7.1 Advanced Settings When available, this dialog box is reached from the Hardware tab of the Bluetooth Configuration Panel. NOTE: Depending on the country in which the hardware is sold and/or in which it will be used, the Advanced button may not be present.
Chapter 7 Security 7.1 AUTHENTICATION Authentication is used to verify identity; it requires a passkey or link key from the remote device. When a remote device attempts access, a visual and/or audio warning notifies the local operator. If the notification is ignored, access is denied after a preset timeout. When devices are “paired,” those devices automatically exchange a Link Key and Authentication is carried out without operator intervention. 7.
Paired devices remain paired even when One of the devices is not on A service connection is interrupted or the service stopped One or both devices are rebooted. To Pair with another device If Secure Connection is enabled, devices will pair automatically the first time they connect (a passkey must be successfully exchanged). To pair with a device manually: In the Folders pane of My Bluetooth Places, right-click a device, select Pair Device from the shortcut menu.
Enter the PIN code. The Bluetooth PIN code should be the same between paired devices. When the remote Bluetooth device attempts to access the service your computer provides, the following message will be pop-up on your Windows desktop. You can check the box to setup the remote Bluetooth access. Remove Pairing In the Folders pane of My Bluetooth Places, right-click a paired device and select Unpair Device from the shortcut menu.
7.6 PASSKEY An alphanumeric string up to 16 characters in length. Passkeys are also called Personal Identification Numbers, or PIN codes. A passkey may be required if the Secure Connection option is enabled for a Bluetooth service or application. 7.7 SECURE CONNECTION A passkey or link key is required each time a connection is attempted. All data exchanged over the Bluetooth connection is encrypted. Depending on other configuration options, authorization may also be required. 7.
Chapter 8 Troubleshooting CANNOT CONNECT TO A PAIRED DEVICE Paired devices are always displayed in My Bluetooth Places, even if the remote device is out of range or not powered up. Verify that the remote member of the pair is within radio range, and powered up, and then attempt the connection again. CANNOT DISCOVER SERVICES ON AN UN-PAIRED REMOTE DEVICE The remote device may not be powered up or may be out of range. Verify that the remote device is powered up.
(HCI) In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Properties section, the fifth entry provides Bluetooth Specification compliance information for the Host Controller Interface. The sixth entry contains the Specification Revision information for the Host Controller Interface, if appropriate.
Upgrade to a newer version of Windows Use an m3u-to-mp3 conversion utility to convert the file(s) into a format that is supported by Windows 98. (Conversion utilities are available as freeware or shareware on the Internet.
