Versatile Terminal for E-money systems VRW-06 User’s Manual Thank you for purchasing "Versatile Terminal for E-money systems VRW-06" Read this manual carefully before using to confirm correct performance.
Table of Contents Introduction .......................................................................................................................................... 2 Read This First ..................................................................................................................................... 4 For Your Safety ..................................................................................................................................... 5 1. Before Use ......................
Introduction This manual explains basic functions and operations of Versatile Terminal for E-money systems VRW-06. Store this manual in a place where it can be referenced to whenever needed. Copyright and Publishing Statements - This manual must not be reprinted in part or whole without permission. - The contents of this manual are subject to change without notice. Trademarks - Company names and product names, written in this manual, are registered trademarks of each said company.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device should not cause harmful interference, (2) It may receive interference from outside. Outside interference may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Read This First [About the Symbols] The symbols and the equipment illustrations in this manual are for safe usage of the equipment. To prevent any harm to the customers, please note the symbols carefully. The symbols and their meanings are described below. Please make sure you are aware of the meanings of the symbols when reading this manual. Symbols in This Manual Warning Ignoring this symbol or mishandling this equipment may cause death or serious injury.
For Your Safety Warning Away from Pacemaker Persons with implanted cardiac pacemakers should be at least 22cm away from this equipment. Do Not Use in Prohibited Areas Do not use this product near person using medical equipments such as cardiac pacemakers or hearing aids. Electrical waves from this equipment are much lower than that of mobile phones. Effects on medical electric equipments are extremely low, but please follow the instructions of each medical institution when using this product.
For Your Safety Warning Keep Away from Fire Do not use this equipment near gas or other flammable materials. It may cause fire or explosion. Do Not Touch with Wet Hands Do not unplug the cable with wet hands. It may cause electric shock. Regarding Disposal When disposing of this product, do not incinerate it or throw it into the fire. This may cause intense burning. Please contact your retailer when disposing of this product as it must be disposed of in a regulated manner.
For Your Safety Avoid Strong Shock Avoid banging or dropping items such as canned goods or bottles on the reading surface of Contactless IC card reader. This action may cause damage to the equipment. Do Not Pour any Type of Liquid. Do not pour any type of liquid such as water on the equipment. This action may cause electric shock or breakdown.
1. Before Use Accompanying Items The following items are included with your Versatile Terminal for E-money systems kit. Please confirm all the items are in the package. Reader Writer Main Unit (VRW-06) Magnetic Stripe Card Reader Unit (VRW-06-MSR) ※Depending on the model, this may or may not be included. Main Unit User's Manual (This book) ※ The plug type may change due to the country of destination. AC Cable AC Adapter Please contact your retailer if there are any items missing or damaged.
Parts and Functions Overview ① ③ ④ ⑤ ⑨ ⑥ ⑦ ② ⑧ No. Contents ① The four LED lights indicate the R/W conditions. The contact IC card is ready when it is inserted into this ② Remarks slot. ③ The four LED lights indicate the R/W conditions. ④ The contactless IC card and the mobile phone are ready by The LED lights should be on. tapping on this symbol. ⑤ Use this part for interface with host equipment. ⑥ Use this part when connecting to PINPAD.
2. How to use How to connect with a Host Terminal via USB Please install and set up the driver on a host terminal before connecting. Please contact your retailer for more details. Confirm the directions of the USB cable and connect it to the USB port of the host terminal. It is recommended to close all other applications when connecting to the host terminal. This equipment has a branched USB cable. Please connect both cables to the USB ports of the host equipment.
How to use Contactless IC Card You may use Contactless IC Cards and mobile phones that are equipped with the Contactless IC Card Function with this terminal. - How to read the Contactless IC Card Cover and tap the Contactless IC symbol in the center of the card reader with the IC card. - How to read a mobile phone equipped with the Contactless IC Card Function Cover and tap the Contactless IC symbol in the center of the card reader with the mobile phone.
How to use IC Card Reader You may use your Contact IC Card with this equipment. - How to insert the Contact IC Card. Insert the Contact IC Card into the slot with the gold chip facing upward and pointing toward the insert direction until it is fully inserted. - How to remove the Contact IC Card. Remove the Contact IC card from the slot, horizontally. Caution - When the card is not inserted fully, it is not possible to read properly.
How to Use Magnetic Stripe Card Reader With this equipment, you may use magnetic stripe card on the model which accompanies the magnetic stripe card reader unit. - How to Read the Magnetic Stripe Card Reader Position the magnetic stripe card down and facing toward the main unit(Note1) and insert it into the end of the card reader slot then swipe it completely from one end to the other, as shown in the diagram below. Make sure to keep the swipe speed constant.
3. Cleaning Cleaning the Product Cleaning methods of the main unit and important notes. - Main Unit For daily cleaning, use a soft, dry and clean cloth to wipe stains off. For stubborn stains, use a soft, well squeezed wet cloth to wipe stains off. Reminder - Do not use volatile organic cleaners such as benzene, thinners etc. These products may cause deformation, discoloration or even breakdown of equipment.
4. How to insert/remove SAM card How to insert/remove SAM card 1. Turn your terminal over and take out the two screws with a screwdriver, as shown in the diagram below. You need a special screwdriver so please refer to the retailer with whom you purchased your terminal. Screws 2. Remove the back panel. 3. Slide the SAM slot in the direction shown below and open it up.
4. Insert the SAM card as shown below. (Position the notches and indentations in the correct direction.) 5. Close the SAM slot and slide it into place as shown below. 6. Return the back panel with the screws that were removed in step 1. That is all there is to inserting the SAM card. ※When removing a SAM card, always follow this procedure. Reminder ・Do not open the back panel unless it is necessary.
5. Troubleshooting If you have any trouble, refer to the solutions below. Troubles The power does not turn on. Contactless IC Cards or mobile phones equipped with the Contactless IC Card Function cannot be read. The Contact IC Card cannot be read. The Magnetic Stripe Card cannot be read. Check point Check the AC Adapter connection. Please make sure you are placing the card or the mobile phone in the right spot.
6. Specification and Regulation Item Specifications Model name VRW-06 VRW-06-MSR USB2.0(Standard A)x2 ― LAN ― Contactless IC Card R/W module ISO14443 Type A/Type B conformity ― Contact IC Card R/W module ISO 7816 EMV Level 1,2 conformity ― LCD 9 Characters(18Bytes)x3 lines with backlight ― Speaker 1W monaural ― Indicator LED × 4 ― Power Supply AC Adapter ― Dimensions 129.8(W) × 173.9(D) × 37.4(H) mm 164.9(W) × 173.9(D) × 37.
Versatile Terminal for E-money systems VRW-06 User’s Manual 1st edition, published in May, 2013 NEC Corporation 5-7-1, Shiba, Minato-Ku, Tokyo, Japan Zip code: 108-0014 (81)3-3454-0011 (Representative) NN-UBQ-QMSR13-0001 19