User's Manual
Table Of Contents
- General
- Module introduction
- Hardware description
- Approvals
- CE Approvals (ETSI)
- FCC Approvals
- ATEX Approvals
- Module Pinout
- Hardware Description
- Hardware Diagram
- Interface characteristics
- Absolute Maximum Ratings
- Environmental characteristics
- Recommended operating conditions
- DC Electrical Characteristics
- Digital IO Specifications
- AC Electrical Characteristics
- Physical Dimensions and Footprint
- Physical Dimensions
- Recommended Footprint
- Soldering Temperature Time Profile (for reflow so
- Recommended temperature time profile for lead-fre
- Reliability Test
- Application Precautions
- Safety precautions
- Engineering design and using precautions
- Storage conditions
- Packaging
- Carrier tape
- Reel
- Ordering Information
- Drawing of Product Label
- Disclaimer
- RoHS Declaration
- Data Sheet Status
- Reference Documents
- Contact Information
SZU06C2 Product Manual
SZU06C2 PM(Rev 2.0)
7
3 Module Pinout
Fig. 3- 1 SZU06C2 Pinout (top view)
In order to facilitate the user to develop and design the products based on SZU06C2 ZigBee
wireless communication module, we have detailed the pin information of SZU06C2 ZigBee
wireless communication module in the following Table 3-1.
All GND pins are directly connected with the module; but for best RF performance, each GND
pin shall be connected to a complete ground externally .
Pin No.
Pin Name
Chip Pin
IO Characteristic
Function Description
1
GND
GND
-
System GND.
2
NC
-
-
Float directly.
3
NC
-
-
Float directly.
4
D0
PD13
RW
General GPIO
5
D1
PD14
RW
General GPIO
6
D2
PD15
RW
General GPIO
7
RESETn
RESETn
-
System Reset,see note 1
8
NC
-
-
Float directly.
9
NC
-
-
Float directly.
10
NC
-
-
Float directly.
11
NC
-
-
Float directly.