User's Manual
Table Of Contents
- General
- Module introduction
- Hardware description
- Approvals
- CE Approvals(ETSI)
- FCC Approvals
- ATEX Approvals
- Module Pinout
- Hardware Description
- Hardware Diagram
- Interface characteristics
- Absolute Maximum Ratings
- Environmental characteristics
- Recommended operating conditions
- DC Electrical Characteristics
- Digital IO Specifications
- AC Electrical Characteristics
- Physical Dimensions and Footprint
- Physical Dimensions
- Recommended Footprint
- Soldering Temperature Time Profile (for reflow so
- Recommended temperature time profile for lead-fre
- Reliability Test
- Application Precautions
- Safety precautions
- Engineering design and using precautions
- Storage conditions
- Packaging
- Carrier tape
- Reel
- Ordering Information
- Drawing of Product Label
- Disclaimer
- RoHS Declaration
- Data Sheet Status
- Reference Documents
- Contact Information
SZU06C1 Product Manual
SZU06C1 PM(Rev 2.0)
6
2. The maximum input parameters stated above shall be considered during installation.
The rules for interconnection of intrinsically safety circuits according EN 60079-11 and
EN 60079-14 have to be taken into account.
3. The maximum service temperature of the communication module when incorporated
into apparatus is -40°C to +80°C. When utilized at this service temperature, a T4
temperature classification is suitable.
4. The communication module shall be installed in an enclosure that provides a minimum
ingress protection of IP20.