User's Manual
Table Of Contents
- General
- Module introduction
- Hardware description
- Approvals
- CE Approvals(ETSI)
- FCC Approvals
- ATEX Approvals
- Module Pinout
- Hardware Description
- Hardware Diagram
- Interface characteristics
- Absolute Maximum Ratings
- Environmental characteristics
- Recommended operating conditions
- DC Electrical Characteristics
- Digital IO Specifications
- AC Electrical Characteristics
- Physical Dimensions and Footprint
- Physical Dimensions
- Recommended Footprint
- Soldering Temperature Time Profile (for reflow so
- Recommended temperature time profile for lead-fre
- Reliability Test
- Application Precautions
- Safety precautions
- Engineering design and using precautions
- Storage conditions
- Packaging
- Carrier tape
- Reel
- Ordering Information
- Drawing of Product Label
- Disclaimer
- RoHS Declaration
- Data Sheet Status
- Reference Documents
- Contact Information
SZU06C1 Product Manual
SZU06C1 PM(Rev 2.0)
9
4
Hardware Description
4.1 Hardware Diagram
Fig. 4-1 Hardware Diagram of SZU06C1
SZU06C1 wireless communication module is based on EFR32MG1B2321 chip from Silicon
Labs, which integrates the RF transceiver complying with 2.4-GHz IEEE 802.15.4, high
performance 32-bit ARM 40MHz Cortex
®
-M4 CPU, 256KB FLASH and 32KB RAM which can
be programmed in the system and many other peripherals with strong functions. In addition,
the EFR32MG1B232 has multiple sleep modes, which makes it to be more adaptable to the
ultra-low power consumption system.It only takes a few milliseconds for change between
different power modes that further ensures the low power consumption of the equipment.
SZU06C1 wireless communication module provides 8-lines GPIO, one UART communication
interface, two debug interface(one is 2-wire SWD and the other is 4-wire JTAG). And you can
develop your custom software easily with them.
In addition to this a number of MAC functions are also implemented in hardware to help
maintain the strict timing requirements imposed by the ZigBee and IEEE802.15.4 standards.