User's Manual

SZU06C1 Product Manual
SZU06C1 PM(Rev 2.0)
Module features
 Mini 33-pin stamp-like SMT package
 U.FL interface for external SMA antenna
 Small form factor: 19 mm x 25 mm x 3.7 mm
 Compliant with EU CE certification
 Compliant with US FCC certification
 Compliant with EU RoHS certification
 Compliant with EU ATEX certification
 Based on ARM Cortex
®
-M4 architecture
 256K FLASH and 32K RAM
 Multiple sleep modes
 Operating voltage range: 2.1V to 3.9V
 Can act as End Device, Router or
Coordinator
 Providing 8 GPIO lines
 Providing UART serial communication
interface
 Firmware upgrade via serial port
 Hardware Supported AES-128 encryption
 Storage temperature range: –40ºC to 125ºC
 Operating temperature range: –40ºC to 85ºC
 Excellent anti-interference ability
 Outstanding networking stability
 Quick network data processing capability that
collection of data from all nodes can be
completed in 12 seconds in a ZigBee
network composed of 100 nodes
 Serial data transmit-receive for end device in
low power mode
 Remotely controlling other modules in the
network with commands
 ZigBee channel scanning and PANID
scanning
 Analyzing topology of current network with
commands
 Updating the network key with commands
 Acquiring the neighbor table, routing table,
and node information with commands
 Switching the current network channel with
commands
 Providing abundant module registers for
users to use and providing timers,
interruptions etc. to execute users’ built-in
functions
 Scanning of ambient energy values to enable
users to view jamming intensity of network
channel signals
 ZigBee multicast function
 ZigBee binding function
 Providing DIYUE Terminal developed from
the ZigBee PRO property set
 Standard JTAG or SWD programming and
real-time online commissioning via IAR