User's Manual
4
●INSTALLATION
1. Please clean the glass which you plan to place the external magnet.
2. Place the pump in correct place and slide the external magnet
close to the internal magnet.(see ref. at Right)
3. You can take out the rotor / pump body without remove the magnet.
4. Remove the cover of connector attached on controller and connect to the pump.
You can use the extend cable if necessary.
Do not direct attach the magnet together and it might cause injury and demage of the glass.
The placement of pump too close to the corner of glass might cause noise / sound reflection.
※
※
キャップ
Model
Leviathan 5000
●Specification
80 ㎜74 ㎜
95 ㎜15 ㎜
Max.Glassthickness20mm
FLOW RATE
SUITABLE FOR AQUARIUM
MAX. POWER CONSUMPTION
GLASS THICKNESS
50∼20,000 L /h
150∼2,200L
24W（±5％）
0.4W（±5％）
Max. 20mm
MIN. POWER CONSUMPTION
Do not turn on the power when the pump is not
setting up correctly inside the water.