User's Manual

8
Mode：
Pumps are working with constant flow.
tnatsnoC
Simulation of strong wave like a rough sea.
Rough Sea
Tide
You can choose the wave mode.
There are 4 pre set Mode :Constant
, Rough sea , Tide ,Random.
And Customs allows to fully setting
up all details by advanced aquarist.
All settings are allowed to setup
details separately.
When you select Rough Sea, you will see the
screen on the left.
You can set the following items on this screen:
Max Speed: Maximum wave power
Min Speed: Wave minimum power
Wave length: You can set the wave intensity
interval. The shorter the speed, the more gradual
the wave strength changes.
Simulation of tide , gradually changes strength.
When you select Tide, you will see the screen on
the left.
You can set the following items on this screen:
Max. Speed: Maximum wave power
Min. Speed: Minimum wave power
Wave length: You can set the gap between the
strength of the wave. The shorter the speed, the
more gradual the wave strength changes.
When you select constant, you will see the left
screen, and you can set the power of the flow with
Max. speed.
The graph below shows the pump's power, the
horizontal axis is the elapsed time, and the
operation of the pumps being set.