Step 5: Now, you can configure and use Jamaal Beacon normally, Working Mode Detail There are three types working mode of Jamaal Beacon. The first is sleep mode, the second is connectable mode, and the third is non-connectable mode. When hit Beacon will enter the connection mode, which can last for 45 seconds. When timeout Beacon will enter the connection mode or sleep mode according to the different configuration, After the disconnection Beacon will enter the connection mode, last for 45 seconds.
‘When Beacon stays asleep, this mode will wait for being wake-up. Connectable Mode Beacon can only be connected in this mode, which needs triggered by tapping Beacon, and it will last for 45 seconds. It means that Beacon can be connected in 45 seconds after being triggered. And Beacon will restore to sleep mode or non-connectable mode it it is not connected in 45 seconds. Non-Connectable Mode Beacon can radio Beacon’s data properly in the non-connectable mode.
Contact Us We have been trying to provide better services and products! Jamaal Beacon makes life more simple and cheerful! If vou are interested in our product, please contact us in following ways.
oor television reception, which can be determined by turning the equipment off an d on, the user is encouraged to try to correct the interference by one or more of the £ hollowing measures: Reorient relocate the receiving antenna, Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the re caver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules.