User Manual



external battery, make sure the built-in battery and the external one are full charged, and connect

the external battery before power on the GCS-202. If the voltage is lower than 11. 2V, the

GCS-202 will beep to remind you.

Only three cells LiPo battery which can be used as external battery.

CW Commander Ground Station Software

There is a CW Commander software with CW Series UAV, which is used for checking aircraft,

setting parameters, creating the flight plan, sending mission command, and so on.

All the operations about CW Commander, please refer to

《

CW Commander Manual

》

Accessories

There are some software and cables for downloading data and update, such as autopilot recorder,

GPS data recorder, autopilot update, GCS-202 update, PPS Process, RS-232 cable and RS-422 cable.

The usage of these software refers to it’s manual.