User Manual

Picture 7 Picture 8 Picture 9

1. Turn on the transmitter switch (Picture 7) and the power indicator light flashes

rapidly. Push the Left Stick all the way down to the lowest position and then

release. The Left Stick will back to the middle position automatically.

(Picture 8 / 9) The power indicator light flashes slowly, which indicates the

transmitter is ready for frequency pairing.

2. Install the battery to the mounted box in the drone as picture show (Picture 10).

When you put the battery, you need to press down the buckle and then push

the battery until fully fixed (Picture 11）.

3. Press for about 2 seconds on the power switch button(Picture 10), put the

drone on the flat surface, the drone body lights turn from flashing to solid bright,

which indicates successful frequency pairing.

Important Notice: Please make sure the drone is placed on the horizontal position after

powering on the drone, so that the drone can work well.

Pre-flight Operation Instruction

Frequency Pairing

Picture 10

Picture 11

Battery Sticker in the upper side

Battery box buckle

Drone power switch