Submittal Sheet
27
800.843.7584 www.cherneind.com
Hub-Fit Gripper
®
•
Clean-Out Gripper
®
Hub-Fit Gripper
®
Plug Features:
•
Ideal for use in hub ttings and in bell-end pipe
•
Pressure rated for conducting DWV tests
•
Made with glass-reinforced ABS plastic
•
Yellow color for greater visibility in pipe
•
Natural rubber o-ring for positive seal
•
Galvanized carriage bolt to prevent corrosion
•
Easy-to-install, extra large zinc wing nut – won’t rust
Clean-Out Gripper
®
Plug Features:
•
Guaranteed to seal any damaged threads
•
Made with glass-reinforced ABS plastic
•
Black color blends well with cast-iron pipe
•
Stainless steel hardware
•
NPT sizes, including hard to nd 3½"
•
Natural rubber threaded o-ring for positive seal
SolutionProblem
Bad Threads
Hub-Fit Gripper
Part Number Nominal Size Usage Range Maximum Back Pressure Length Product Weight
270528 2" (50 mm) 2.25"-2.45" (57-63 mm) 13 psi (0,9 bar) 30 ft. (9 M) 1.9" (48 mm) 3.3 oz (0.09 kg)
270538 3" (75 mm) 3.44"-3.53" (88-90 mm) 13 psi (0,9 bar) 30 ft. (9 M) 2.4" (61 mm) 9.5 oz (0.27 kg)
270548 4" (100 mm) 4.41"-4.53" (112-115 mm) 13 psi (0,9 bar) 30 ft. (9 M) 2.4" (61 mm) 11.9 oz (0.34 kg)
Clean-Out Gripper
Part Number Nominal Size Usage Range Maximum Back Pressure Length Product Weight
270168 2" 2.20"-2.5" 17 psi 40 ft. 1.9" 2.4 oz
270178 3" 3.23"-3.50" 17 psi 40 ft. 2.2" 3.5 oz
270138 3.5" 3.78"-4.25" 17 psi 40 ft. 2.2" 7.5 oz
270188 4" 4.22"-4.6" 17 psi 40 ft. 2.2" 9.7 oz
Clean-Out
Gripper
®
plug
Hub-Fit
Gripper
®
plug
DEFLECTION GAUGES TESTING EQUIPMENT TOOLS & ACCESSORIES TECHNICAL DATAPNEUMATIC PLUGS MECHANICAL PLUGS