Datasheet

www.switches-sensors.zf.com
Page 2 of 2, Last update 2016-07-06, Specifications subject to change without notice.
*Not commonly stocked
Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be connected
between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable.
Recommended External Pull-Up Resistor
Volts DC
5
9
12
15
24
Ohms
1k
1.8k
2.4k
3k
3k
Open Collector Sinking Block Diagram
Dimensions mm (inches)
Products
Part Number
Leads
MP101301
24 AWG x 150 mm
MP101302*
24 AWG x 150 mm
MP101303*
24 AWG x 150 mm