User's Manual

5
1 Bring the keyboard and mouse into range of the
receiver, max. 2 m.
2 Press the CONNECT button on the top of the
receiver until the LED quickly flashes green
and red.
3 Press the CONNECT button on the bottom of
the keyboard on the cover of the battery
compartment until the LED quickly flashes
red.
A new channel is saved in the keyboard and
receiver.
4 Press the CONNECT button on the bottom of
the mouse until the LED goes out.
A new channel is saved in the mouse and
receiver.
8 Installing the palm rest
1 Turn the keyboard and the palm rest so that the
bottoms point upward.
2 Press both clips of the palm rest onto the round
receivers in the cutouts of the keyboard.
The palm rest can be folded back like a hinge.
You can lean the keyboard in this storage
position.
Damage to the palm rest and keyboard
Do not let the keyboard stand freely, but rather
lean it up against something else. Example: a
monitor.
Do not use or press the keyboard while it is in the
storage position.
9 Mounting mouse design covers
➤ Press the cover into the cut-outs with the pins
straight.
10 Wireless keyboard (G86-21950)
Designation Value
Keyboard type 104/105 key keyboard
with 29 additional keys
Battery type
(power supply)
2 rechargeable
alkaline batteries,
type AA (LR6)
Supply voltage 2.0 to 3.3 V SELV