Manual

Engine Maintenance And Servicing Manual
4. The removal and installation of oil pump with oil seal assembly
removal：
——Loosen six M6×30 hexagonal flange surface bolts. Remove the
bolts (as the figure indicates)
——Remove oil pump with oil seal assembly
——Pry out the front oil seal of crankshaft by screwdriver or chisel.
Note: Don’t damage the front oil seal bore.
——Remove seven M6 countersunk head screws (as the arrow in
figure indicates)
——Remove oil pump cover
——Take out the inner and outer rotor
Fig. 79
Fig. 80
Fig. 81
Fig. 82
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn