Engine

Diameter of main journal and size of main bearing shell
Class
Diameter of main
journal (unit: mm)
Diameter of the main bearing
bore of the cylinder block
(unit: mm)
Thickness of the main
bearing shell
(unit: mm)
Standard 57.98—58.00 62.2935+0.0065 2.131—2.138
Oversized by 0.4 57.98—58.00 62.6935+0.0065 2.331—2.338
Downsized by 0.02 57.98—58.00 62.2935+0.0065 2.141—2.148
Downsized by 0.25 57.73—57.75 62.2935+0.0065 2.256—2.263
Downsized by 0.50 57.48—57.50 62.2935+0.0065 2.381—2.388
Downsized by 0.75 57.23—57.25 62.2935+0.0065 2.506—2.513
Downsized by 0.25
and oversized by
0.4
57.73—57.75 62.6935+0.0065 2.456—2.463
Downsized by 0.50
and oversized by
0.4
57.48—57.50 62.6935+0.0065 2.518—2.558
Downsized by 0.75
and oversized by
0.4
57.23—57.25 62.6935+0.0065 2.706—2.713
Size of crank shaft thrust, thrust spacer and cylinder block thrust
Class
Size of cylinder block thrust
(unit: mm)
Size of crank shaft thrust
(unit: mm)
Thickness of thrust
spacer (unit: mm)
Standard 24+0.03 28.825-28.875 2.326+0.025
Oversized
by 0.38
24+0.03 29.205-29.255 2.516+0.025
2 thrust spacers
A-30
PDF created with pdfFactory Pro trial version www.pdffactory.com