LUBRICATION SYSTEM

——To remove the thing plastic strip.
OIL FILTER AND OIL PRESSURE SENSOR
Disassembly:
——To demount the oil filter by rotating the filter
counterclockwise.
——To remove the oil pressure sensor.
Assembly:
——To spread engine lubrication oil onto the oil filter
gasket and screw it up to the fitting to 12-17N.m.,
or screw the oil filter manually and screw more
3/4-1 round when the rudder gasket reaches the
cylinder.
——To spread Letai 243 seal glue onto the oil
pressure sensor screw threads and screw it to the
cylinder main oil passage to 25-29N.m.
Oil pressure sensor screw threads are 1/4″-18NPTF.
The supply voltage of oil pressure sensor is 6-24V.
The alarm triggering pressure is 30±15Kpa.
Oil Filter
Oil Pressure Sensor
8.0-25.0N.M Fastening Torque Of 8.0-25.0N.M
B-10
PDF created with pdfFactory Pro trial version www.pdffactory.com