LUBRICATION SYSTEM

——Hydraulic jib gets oil through the oil passage
through which the oil tank at the camshaft
supplies oil to the cylinder cap.
——The interface between valve rocker and hydraulic
jib is lubricated by oil through the oil hole in
hydraulic jib.
——Rocker seat is lubricated by oil through cylinder
cap oil passage. The interface between valve
small end and rocker is lubricated through
splashes.
OIL PAN
Disassembly:
——To unscrew the oil-tapping bolt and empty the
pan.
——To unscrew 18 M6X20 bolts.
——To take out the oil pan gasket.
——To check if both reinforcing pads are clamped
tightly on the back of the oil pan flange.
B-3
PDF created with pdfFactory Pro trial version www.pdffactory.com