Service Manual

117
III. Disassembly/Reassembly of Engine
Compartment Harness
Part Number: S21-3724010
(I). Preparation
Tools:
socket wrench, cross screwdriver, flat head screwdriver
(II). Precautions:
Power OFF before the electrical elements and
harnesses are removed.
The ignition switch must be in OFF state.
(III). Removal Procedure
1. Removal
1.1.1. Remove the lower left guard plate from the
instrument panel. (See Disassembly/Reassembly of
Instrument Panel)
1.1.2. Pull out the ECU’s connector.
1.1.3. Remove the A pillar lower trim with a cross
screwdriver.
1.1.4. Remove the ECU’s two grounding points.