Service Manual

127
III. Disassembly/Reassembly of Engine
Harness
Part Number: S21-3724180
(I). Preparation
Tools:
socket wrench, cross screwdriver, flat head screwdriver
(II). Precautions
Power OFF before the electrical elements and
harnesses are removed.
The ignition switch must be in OFF state.
(III). Removal Procedure
1. Disassembly/Reassembly of Battery and Air
Cleaner.
1.1.1. Remove the positive of battery.
1.1.2. Remove the negative of battery, and take off the
battery assy.
1.1.3. Loosen the fixing nuts of air cleaner with a
sleeve.
1.1.4. Loosen the fixing nuts of air cleaner inlet with a
sleeve.