Service Manual

13
3.1.2. Detach two locating bolts from the
luggage boot lock (the installation torque is 9±1
Nm)
3.1.3. Remove the luggage boot lock core.
3.1.4. Remove two fixing bolts from the trunk
(i.e. luggage boot) lock body with a socket
wrench.
3.1.5. Take off the trunk lock body.
3.2. Installation Step
The installing steps are reverse to those for
removal.
Precautions on installation of luggage boot
lock: check whether the lock column is
deformed, whether the riveted connections are
in its proper positions, and whether the lock
tongue can open or close flexibly, smoothly.
4. Removal of license plate lamp
Preparation of tool(s): cross screwdriver,
open-end wrench.
4.1. Removal Step
4.1.1. Remove the trunk internal ornament plate
(see Removal of trunk lid ornament plate)
4.1.2. Remove two fixing bolts from the license
plate lamp with an open-end wrench.