Service Manual

150
III. Disassembly/Reassembly of Instrument
Harness
(I). Preparation
Tools:
10＃/13＃ socket wrench, cross screwdriver, flat head
screwdriver
(II). Precautions
Power OFF before the electrical elements and
harnesses are removed.
The ignition switch must be in OFF state.
(III). Removal Procedure
1. Removal
1.1. Remove the console.
1.2. Remove the instrument panel. (See
Disassembly/Reassembly of Instrument Panel)
1.3. Pull out the related connectors connected with the
instrument harness.
1.4. Take off the instrument panel and cross beam.
1.5. Loosen thefix screws of front air duct, and take off
the front air duct.