Service Manual

153
III. Disassembly/Reassembly of Evaporator
Harness
(I). Preparation
Tools:
8＃/10＃socket wrench, flat head screwdriver
(II). Precautions
Power OFF before the electrical elements and
harnesses are removed.
The ignition switch must be in OFF state.
(III). Removal Procedure
1. Removal
1.1. Remove the instrument panel assy. (See
Disassembly/Reassembly of Instrument Panel)
1.2. Remove the evaporator assy. (See
Disassembly/Reassembly of Evaporater)
1.3. Unclench the evaporator harness connector with a
flat head screwdriver.
1.4. Pull out the all sensor, actuator connectors.