Service Manual

163
III. Disassembly/Reassembly of Rear Left
Door Inner Harness
Part Number: S21-3724180
(I). Preparation
Tools:
socket wrench, cross screwdriver, flat head screwdriver
(II). Precautions
Power OFF before the electrical elements and
harnesses are removed.
The ignition switch must be in OFF state.
(III). Removal Procedure
1. Removal.
1.1. Remove the rear left door inner guard plate . (See
Disassembly/Reassembly of Door Inner Guard Plate)
1.2. Take off the rear left door inner protective film.
1.3. Pull out the lift motor connector.