Service Manual

56
Chapter 6 Disassembly/Reassembly of Ceiling
1. Preparation
Tools: socket wrench, cross screwdriver, flat
head screwdriver
2. Precautions
2.1. During the disassembly/reassembly, pay
more attention to the application of appropriate
force, without crude operation.
2.2. During the disassembly/reassembly of
interior ornaments, especially pay more
attention to the protection of surface ornaments
so as to avoid the damage of the ornaments.
3. Disassembly/Reassembly of
Sun Visor
3.1. Removal Step
3.1.1. Loosen two fixing screws on left front
sun visor with a cross head screwdriver
Torque: 3±1Nm
3.1.2. Take off the front left sun visor.
3.2. Installation Step
The installing steps are reverse to those for
removal.
3.3. Refer to Disassembly/Reassembly of Front
Left Sun Visor for the disassembly/reassembly
of front right sun visor.