Service Manual

57
4. Disassembly/Reassembly of
Roof Hand-Hold
4.1. Removal Step
4.1.1. Remove the right/left fix screws with a
cross screwdriver.
Torque: 9±3Nm
4.1.2. Take off the hand-hold.
4.2. Installation Step
The installing steps are reverse to those for
removal.
4.3 Refer to Disassembly/Reassembly of Front
Right Hand-Hold for other hand-holds.
5. Disassembly/Reassembly of
Front Ceiling Lamp
5.1. Removal Step
5.1.1. Remove the front ceiling lamp cover with
a flat head screwdriver.
Note: do not scratch part surface.
5.1.2. Loosen the front ceiling lamp fixing bolt.
Torque: 1.5±0.5Nm