Service Manual

58
5.1.3. Pull out the harness connector, and then
take off the front ceiling lamp assy.
5.2. Installation Step
The installing steps are reverse to those for
removal.
6. Disassembly/Reassembly of A
Pillar Trim
6.1. Removal Step
6.1.1. Prize A pillar protective board with a flat
head screwdriver.
6.1.2. Take off the A pillar trim.
6.2. Installation Step
The installing steps are reverse to those for
removal.
7. Disassembly/Reassembly of B
Pillar Trim
7.1. Removal Step
7.1.1 Remove B pillar lower protective board
(refer to Disassembly/Assembly of Seat Belt)