Service Manual

63
3.1.2. Remove one fix screw from the bottom
of front ashtray guide run with a cross
screwdriver.
Torque: 10±1 Nm
3.1.3. Remove two fix screws from the front of
front ashtray guide run with a cross
screwdriver.
Torque: 3±1 Nm
3.1.4. Take off the front ashtray guide run.
3.2. Installation Step
The installing steps are reverse to those for
removal.
4. Disassembly/Reassembly of Glove
Case
4.1. Removal Step
4.1.1. Unclench the long clip core at the right
lower part of glove case with a screwdriver, and
take off the clips.
4.1.2. Swing and take off the glove case.
4.2. Installation Step
The installing steps are reverse to those for
removal.
5. combination instrument
Disassembly/Reassembly of
5.1. Removal Step
5.1.1. Remove the central console panel, and
then remove the combination instrument
ornament frame.
Bolts under
the astray