Service Manual

75
4.1.5. Remove eight housing connection screws
from the distributor with a cross screwdriver (as
shown in the figure).
Torque: 1.5±0.5 Nm
4.1.6. Detach the distributor. In this case, take
off the air baffle from the interior.
4.1.7Remove four fix screws from the air inlet
with a cross screwdriver, and take off the air
inlet.
Torque: 1.5±0.5 Nm
4.1.8 Remove the fixing screws from the
inner-outer recirculating air control mechanism
with a cross screwdriver, and then take off the
inner-outer recirculating air control mechanism.
Torque: 1.5±0.5 Nm