Workshop Manual

III. Disassembly, Reassembly and Maintenance of Rear Brake

1. Structural Diagram of System

1. Brake Drum 2. Rear Brake Assy

3. Rear Wheel Hub Bearing Assy 4. Oil Seal

5. End Cover 6. Bolt

7. Rear Wheel Sensor 8. Rear Brake Pipe Retaining Clip

9. Double-Opening Pipeline Clip 10. Tower Bar

11. Rear Shoe Spring Leaf 12. Rear Shoe Spring

Structural Diagram of Rear Brake Assy

(1) Brake Drum (2) Rear Brake Assy

(3) Wheel Hub Bearing Unit (4) Brake Wheel Cylinder

(5) Dust Cover (6) Rear Brake Shoe

2. Preparation

Tools:

ratchet wheel, lug bar, 10#, 19#, 32# sleeve, 10# box wrench,

vice, torque spanner, right-angled screwdriver.

Accessories: brake fluid

3. Precautions

3.1 Please wear necessary labor protection supplies to avoid accidents.

3.2 The brake fluid is noxious. If it contacts your skin or eye(s) by careless, please use a lot of

clean water to wash the skin or eye(s), and go to see a doctor in time, if necessary.

3.3 Waste brake fluid shall be put in vessels. DO NOT pour the fluid into the sewage system or

store the fluid together with the domestic wastes.

Rear Left Brake